Bedienungsanleitung Silvercrest SDBS 2800 A1 - IAN 285972 (Seite 24 von 88) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

679072

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

SDBS 2800 A1

GB│IE │ 21 ■

Automatic switch-oﬀ

This steam iron is ﬁtted with an automatic switch-oﬀ

system. This stops the iron from heating up.

If the iron is resting on its sole - and is not moved

for about 30 seconds, there will be a warning

beep and the AUTO OFF control lamp  ﬂashes.

The iron will stop heating up. To deactivate the au-

tomatic switch-oﬀ, lift up the iron and move it gently

from side to side. The AUTO OFF control lamp 

goes out and the iron will heat up again.

If the iron is on its base  and is not moved for

about 1 minute, there will be a warning beep and

the AUTO OFF control lamp  ﬂashes. The iron

will stop heating up. To deactivate the automatic

switch-oﬀ, lift up the iron and move it gently from

side to side. The AUTO OFF control lamp  goes

out and the iron will heat up again.

NOTE

The automatic switch-oﬀ is not intended as a

substitute for removing the plug from the mains

power! This is merely intended to reduce the ﬁre

hazard if you forget to switch oﬀ the iron!

Cleaning

Self-cleaning function

■ Fill the water tank to the "MAX" marking.

■ Insert the plug into the mains power socket.

■ Move the temperature control  to the "MAX"

position.

■ Use the steam quantity button  to select steam

level 3.

■ Allow the steam iron to heat up until the control

lamp "LINEN"  lights up permanently.

■ Hold the steam iron horizontally over a suitable

container.

NOTE

If your hands are sensitive to heat, wear oven

gloves. Hot steam escapes during cleaning.

■ Press the self-clean button 3 and keep it

pressed. Move the steam iron back and forth a

little.

Steam and boiling water will ﬂow from the

steam exit holes in the sole of the iron -. Any

impurities and limescale that may be present are

ﬂushed out.

■ Release the self-clean button 3 as soon as all

of the water in the water tank is used up.

■ Dry the sole of the iron - thoroughly. To do

this, move the sole of the iron - back and forth

several times over a towel or an old piece of

material.

■ Allow the steam iron to cool down before putting

it away.

Housing and sole of the iron

MORTAL DANGER!

► Always remove the plug before cleaning the

appliance. There is a risk of electric shock!

RISK OF INJURY!

► Allow the appliance to cool down before

cleaning it. Otherwise, there is a risk of burns!

CAUTION! PROPERTY DAMAGE!

► Do not use aggressive, abrasive or chemi-

cal cleaning agents. They can damage the

surface and also lead to irreparable damage

to the appliance.

■ Clean the housing with a soft, dry cloth only.

■ Clean the sole of the iron - using a damp cloth

and a mild, non-scouring detergent.

■ Dry the appliance well before using it again.

Storage

Store the cooled-down appliance in a clean, dust-

free and dry location.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SDBS 2800 A1 - IAN 285972 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info