Bedienungsanleitung Silvercrest SEF 2300 D3 - IAN 301414 (Seite 28 von 129) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

684689

Zoom out

Zoom in

Vorherige Seite

1/129

Nächste Seite

WARNING! Risk of material

damage

~ Use the original accessories only.

~ The frying basket should always be

used when frying.

~ The device is fitted with non-slip plastic

feet. As furniture is coated with a variety

of different varnishes and acrylics, and

treated with different cleaning agents, it

cannot be completely ruled out that

components are contained in some of

these substances that could damage

and soften the plastic feet. If necessary,

place a non-slip mat under the device.

~ Splashes of fat may occur during opera-

tion. You should therefore place the de-

vice on a surface that is resistant to both

heat and grease.

~ Frying oil and fat should not be dis-

charged into drains or the toilet! The oil

or fat solidifies so that the drains may

be clogged.

~ Make sure that the surface under the de-

vice is dry.

~ Be careful when handling the grease fil-

ter. It can easily be damaged by

squeezing or cracking.

~ Never place the device on hot surfaces

(e.g. hot plates) or near to heat sources

or open fire.

~ Do not use any astringent or abrasive

cleaning agents.

4. Items supplied

1 Base unit|11 (control element|9 and heat-

ing elements|12)

1 Housing|15

1 Lid of the oil container|1 with a grease fil-

ter|22

1 Oil container|14

1 Frying basket|18

1 Handle of the frying basket|17

1 Operating instructions

5. The basics of frying

Preparation of the food

• All food must be as dry as possible

when used for frying, because water

will deflagrate explosively if it comes

into contact with hot fat. Dry the food to

be fried and remove any ice from fro-

zen food.

• Deep-frozen food should be partially

thawed before frying so that the food

absorbs less fat. Remove as much water

and ice as possible before you put the

food into the fryer.

• Meat, fish, and vegetables should be

cut into small pieces.

• In case of breaded food, please make

sure that the breading sticks as tightly as

possible to the food to be fried. Any

breading falling off the food during fry-

ing contaminates the fat.

Frying time and frying

temperature

• For a tasty and healthy result, the infor-

mation on the packaging should be ob-

served very carefully when selecting the

temperature and the frying time.

• Only small quantities should be fried at

a time.

• The frying basket may not be filled more

than up to the MAX marking. If more

food to be fried is put into the basket,

the temperature of the fat will drop too

much, the frying process will take

longer, and more fat will be absorbed

by the food to be fried.

• Acrylamide may be carcinogenic. In or-

der to reduce the formation of acryla-

mide as much as possible, both high

temperatures (of more than 170 °C) and

browning the food too much should be

avoided. With temperatures of more

than 175 °C significantly more acryla-

mide will be formed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SEF 2300 D3 - IAN 301414 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info