646948
11
Zoom out
Zoom in
Vorherige Seite
1/98
Nächste Seite
9
6.4 Melt existing fat
If the fryer already contains solidified fat
from an earlier frying/fondue session, it must
be melted in the fryer. Do this very carefully
so that the melting fat does not start to spit
or the fryer does not overheat.
1. Turn the temperature selector 12 as far
as it will go to the left: "MIN".
2. Insert the plug in a socket.
The red indicator light 10 comes on to
show that the appliance is connected to
the power supply.
Caution! Ensure that you don’t damage
the fat container 6 with the fork.
3. Use a fork to prick a few holes in the fat
so that any steam formed can escape
more easily.
4. Close the lid 3.
5. Turn the temperature selector 12 to
"70".
The appliance heats up. As soon as the
temperature selected is reached, the
green indicator light 11 lights up.
6. Let the fat melt.
7. Wait until the fat has completely melted.
7. Operating the appliance
7.1 Fr ying
1. Prepare the fryer for frying (see
“6.1 Preparations for frying” on
page 8).
2. Turn the temperature selector 12 to
"MIN".
3. Insert the plug in a socket.
The red indicator light 10 comes on to
show that the appliance is connected to
the power supply.
4. Press the unlock button of the frying
lid 8.
The frying lid 3 will open.
5. Remove the frying basket 2.
6. Add oil or fat (see “6.3 Add the oil or
fat” on page 8).
7. If the fryer contains cold, solidified fat,
melt it first (see “6.4 Melt existing fat”
on page 9).
8. Set the temperature selector 12 to the
desired frying temperature.
The appliance heats up. As soon as the
temperature selected is reached, the
green indicator light 11 lights up.
Refer to the pack of what you are frying
for the correct frying temperature.
To keep the oil or fat at the right
temperature, the thermostat
automatically switches the heating on
and off. You can see this by the green
indicator light 11 regularly going on
and off.
Note: We recommend that you heat the oil
for at least 10 to 15 minutes before you start
frying. Close the lid 3.
Note: You can leave the frying basket 2 in
the fryer during heating.
9. Press the unlock button of the lid 8.
The lid 3 will open.
Warning! When frying frozen
items, pay attention to Tip 2 (see
“10. Various tips” on page 12) to
prevent the fat spitting.
RP 109780 Mini Fritteuse LB3 Seite 9 Donnerstag, 19. Februar 2015 5:38 17
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

silvercrest-sfm-840-a2---ian-109780

Suche zurücksetzen

  • Wie funktioniert das zerlegen in Einzelteile zur Reinigung im geschirrspüler Eingereicht am 15-3-2020 10:46

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SFM 840 A2 - IAN 109780 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info