679199
35
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
- 33 -
Description of the appliance
1 Cutter foil retainer
2 Release tabs
3 Locking button
4 On/Off switch
5 Charge-LEDs
6 Socket
7 Storage case
8 Brush
9 Mains power adapter
0 Connection plug
q Long hair trimmer
w Protective cap
Technical Data
Mains adapter
Input voltage: 100 - 240 V
~
50/60Hz
Output Voltage: 4 V 400 mA
Protection class: IPX4
Electric razor
Input voltage: 4 V 400 mA
Batteries : 2 x AAA, Ni-MH
Protection class: IPX4
Shaving without the
power cable
Note:
On to the first usage, there could be production re-
lated oil residues on the cutter foil. Wipe them off with
an absorbant and lint-free cloth.
+
Attention! Appliance Damage!
NEVER use the razor in the bathtub or shower. This
could irreparably damage the appliance.
This razor can be used without the power cable. In
this case, you must charge it before the
ffiirrsstt
use for
about 14 hours.
1. Check to ensure that the appliance is switched off.
2. Insert the connector plug 0 into the socket 6
on the razor. Pay heed to the correct polarity:
The guide pillar in the socket 6 must grip the guide
rail on the connector plug 0. If it does not, the
connector plug 0 cannot be inserted.
3. Connect the plug with a mains power socket. The
batteries are being charged.
Note:
To optimise the life of the batteries, if possible do not
interrupt the charging process until the batteries have
been fully charged.
Furthermore, it can happen that if you interrupt the
charging process, the charge LEDs 5 will not indi-
cate the correct load capacity of the battery's!
The charge LEDs 5 indicate to what extent the ap-
pliance is charged: The more charge LEDs 5 there
are that glow permanently, the higher the current
charge is. When the appliance is fully charged (from
a complete discharge, this will be after about 8
hours), remove the connection plug 0 from the
socket 6 and disconnect the power adapter 9 from
the mains power supply. The razor can now be used
without the power cable.
Note:
The full charging process after complete discharge
of the batteries takes approx. 8 hours. You can then
use the razor for approx. 60 minutes.
IB_38018_SFR24A1_LB5 24.08.2011 12:15 Uhr Seite 33
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SFR 2.4 A1 - IAN 38018 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Silvercrest SFR 2.4 A1 - IAN 38018

Silvercrest SFR 2.4 A1 - IAN 38018 Bedienungsanleitung - Deutsch, Holländisch, Französisch, Italienisch - 50 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info