Bedienungsanleitung Silvercrest SHDP 5.1 A1 IAN 64329 (Seite 80 von 98) (Englisch, Portugiesisch, Spanisch)

737670

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

- 78 -

For both variations – "YPbPr" and "YUV"– you will need

• an audio cinch cable (not supplied)

• an YUV cable (not supplied) These can be obtained from your dealer.

On the rear panel of the DVD player you will find the connection sockets

Y, Pb/Cb and Pr/Cr.

Connecting the DVD player via component signal:

• Connect the sockets Y (green), Pb/Cb (blue) and Pr/Cr (red) with the cor-

responding sockets on the television.

• Connect the audio output sockets AUDIO L/R on the rear panel of the DVD

player to the corresponding audio inputs on the television with an audio

cinch cable.

Make sure that the red and white colour markings correspond.

• For playback select the matching channel on your television Check with

the television's instruction manual on how you can set the AV channel.

• In the OSD menu select the menu option VIDEO/VIDEO OUTPUT/YUV.

The menu option VIDEO OUTPUT is only selectable when the HDMI output

is deactivated. On this subject see also chapter 10 "Settings in the OSD

menu".

8.5 Connecting to a television via HDMI

This connection variant is only possible with very high grade televisions,

LCD/Plasma screens or Video projectors

Check with the instruction manual of the corresponding playback device to

see if this connections variant is available. It is possible that additional play-

back device settings may have to be implemented. For this type of connection

you will need the HDMI cable (supplied);

Connecting the DVD player via HDMI:

• Connect the jack inscribed with HDMI using a HDMI cable to the

corresponding socket on the television.

• For playback select the matching channel on your television Check with

the television's instruction manual on how you can set the AV channel.

• In the OSD menu select the menu option VIDEO/HDMI Setup/ON.

On this subject see also chapter 10 "Settings in the OSD menu".

9. Connecting audio components to the

DVD player

Besides sound playback of DVDs, VCDs/S-VCDs and audio and MP3-CDs

via the speaker of the television, to which the DVD player is connected,

sound can also be played back via external audio components such as

a HiFi system, Dolby digital/DTS receiver or a surround sound system.

9.1 Requirements for the connection of a HiFi system

In order to enjoy a full sound experience when playing DVDs with the DVD

player you can connect a HiFi system to the player. Before connecting check

with the HiFi system's instruction manual to verify...

• if the HiFi system is suitable for connection to a DVD player.

• if the HiFi system is equipped with cinch sockets; if yes, you can connect

the HiFi system to the DVD player via cinch cables.

Connecting a HiFi system:

• Connect the audio output sockets AUDIO L/R on the rear panel of the DVD

player to the corresponding audio inputs on the HiFi system with an audio

cinch cable. Make sure that the red and white colour markings correspond.

• Check with the instruction manual which settings on the HiFi system may

be necessary in order to reproduce sound via the HiFi system during the

playback of a DVD, VCD/S-VCD, audio or MP3-CD from the DVD player.

Note:

For an optimal sound experience place your HiFi system's loud speakers to

the left and to the right of the television, on which you connected the DVD

player.

If you connected the DVD player to the television via a Scart cable the audio

signal will be transmitted via the cinch cable to your HiFi system as well as

via the Scart cable to the television. In this case, set the volume of the television

to the lowest value.

9.2 Connecting digital audio components via digital cables

In order to enjoy sound playback throughout the room from correspondingly

equipped DVDs (recognizable by the Dolby Digital or DTS logos), you can

connect the DVD player to a digital audio component, for example, a Dolby

Digital or DTS receiver or a suitable surround sound system.

The cables necessary for the following described connection variations can

be obtained from your dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SHDP 5.1 A1 IAN 64329 Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SHDP 5.1 A1 IAN 64329

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info