Bedienungsanleitung Silvercrest SHDP 5.1 A1 IAN 64329 (Seite 94 von 98) (Englisch, Portugiesisch, Spanisch)

737670

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

- 92 -

17. Troubleshooting

Display is blank/DVD player shows no functions even though it is

switched on

ACheck to see that the power cable is inserted properly into the power

socket.

BCheck to ensure that the power socket in which you have plugged the

power cable of the DVD player is live by connecting another device to

it. If necessary plug the DVD players power cord into another power

socket.

CCheck to see that the display dimmer function is switched off.

To do this press the DIMMER button on the remote control.

DSwitch off the DVD player by activating the POWER switch and then wait

ten seconds. Then switch the DVD player back on by activating the POWER

switch again.

The display shows "NO DISC" even though there is a disc inserted

AThe disc is dirty, scratched or damaged. Clean the disc or insert another

disc.

BThe Country/Region code on the inserted DVD/VCD/S-VCD does not

correspond to the Country/Region code of the DVD player. In this case

the DVD/VCD/S-VCD cannot be played with the DVD player.

Inserted disc will not playback

It is possible that a layer of condensation has built up on the DVD players laser

scan lens. This can be the case especially if the DVD player has been subjected

to strong temperature fluctuations.

If this is the case place the DVD player in a dry environment at normal room

temperature. First remove the currently inserted disc from the disc tray.

Then leave the DVD player switched off for at least one hour without using

until the condensation film has evaporated.

No image or Black/White image only

ACheck to make sure that all connection cables between the DVD player

and the television (or Video projector) are firmly inserted into the

corresponding sockets

BCheck to make sure that the settings in the OSD menu match the connections

variant, with which you have connected the DVD player to the television

(or Video projector).

For this see chapter 8. "Connecting the DVD player to a television".

CCheck by means of the televisions (or Video projectors) operating

instructions to see if settings to the television (or Video projector) may

be necessary in order to use the DVD player with the television.

No sound

ACheck to see if the television and/or DVD player have possibly been

switched to mute.

BCheck to see if all connection cables between the DVD player and potentially

connected audio components are plugged firmly into the corresponding

sockets.

CCheck whether the settings in the OSD menu match the connection option

you have used to connect the audio components to the DVD player.

For this see chapter 9. "Connecting an audio component to the

DVD player".

DUsing the television's instruction manual check to see if current settings to

the television are necessary in order to use the DVD player with the tele-

vision.

ECheck by means of the operating instructions for a potential connected

audio component if settings to it are necessary in order to use it with the

DVD player.

FIf you …

• have connected the DVD player to a stereo television and have not

connected an audio component to the DVD player or

• have connected a Dolby Prologic compatible audio component via the

analogue stereo outlet (via cinch cables to the cinch sockets L and R)

of the DVD player:

Check to see that you have selected in the OSD menu AUDIO with the

menu input FRONT SPEAKER the setting LARGE.

No 4:3 or 16:9 image

ACheck by means of the televisions operating instructions, which image

formats the television has at its disposal.

BCheck to see if the settings in the OSD menu match the available image

format of the television.

Remote control not functioning

ACheck to make sure that the remote control batteries have been inserted

into the battery compartment with the correct polarity.

BCheck to see if the remote control batteries are exhausted and, if necessary,

change both batteries.

CMake sure that there are no obstacles located between the remote control

and the DVD player.

DRemain within five meters of the DVD player when using the remote control.

Playback language/ Subtitle language do not correspond to the

settings in the OSD menu

The playback language/Subtitle language setting in the OSD menu is not

available on the inserted disc.

One or several functions can not be switched on

The selected functions may not be available on all DVDs/VCDs/S-VCDs!

If you attempt to execute a function that is not available, the symbol is

displayed on the television screen.

None of the buttons on the device or on the remote control are

functioning/other malfunctions

ASwitch off the DVD player by pressing the POWER switch. Wait ten seconds

and then activate the POWER switch again to switch the DVD player on

once more.

BIn the event that the malfunction is still present: Reset the DVD player to

its default settings.

For this see chapter 10.6 "Setup menu PREFERENCE".

Contact one of our service partners in your area if …

• the stated function defect can not be resolved as described or

• other functional defects arise.

For this see chapter 19 "Warranty and service".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SHDP 5.1 A1 IAN 64329 Seite 94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SHDP 5.1 A1 IAN 64329

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info