Bedienungsanleitung Silvercrest SHDP 5.1 A1 IAN 64330 (Seite 79 von 98) (Englisch, Portugiesisch, Spanisch)

737671

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

- 77 -

8.1 Connecting to a television via ScartCable/RGB

Note:

Connecting the DVD player to a television with a Scart cable via the RGB input

offers a high quality connection. Select this connection variation in the case of

televisions equipped with an RGB input. If you are not sure if the television is

equipped with an RGB input then you can check this by consulting the television's

instruction manual.

• Connect the jack inscribed with SCART to a television Scart socket by

using the supplied Scart cable.

• For playback select the matching channel on your television Check with

the television's instruction manual on how you can set the AV channel.

• In the OSD menu select under the VIDEO/VIDEO OUTPUT/RGB or

S-VIDEO menus.

The menu option VIDEO OUTPUT is only selectable when the HDMI output

is deactivated. On this subject see also chapter 10 "Settings in the OSD

menu".

8.2 Connecting to a television via S-Video

Note:

For this type of connection the television must have available an S-Video input

and two audio "IN" cinch sockets. If you are not sure if the television is equipped

with S-Video and/or cinch sockets you can check this by consulting the television's

instruction manual.

For this connection variant you will need:

• an audio cinch cable (not supplied)

• an S-video cable (not supplied) These can be obtained from your dealer.

To connect the DVD player to a television via S-Video:

• Connect the jack inscribed with S-VIDEO to a television S-Video socket

using an S-Video cable.

• Connect the audio output sockets AUDIO L/R on the rear panel of the DVD

player via an audio cinch cable to the corresponding audio inputs on

the television. Make sure that the red and white colour markings

correspond.

• For playback select the matching channel on your television Check with

the television's instruction manual on how you can set the AV channel.

• In the OSD menu select the menu option VIDEO/VIDEO OUTPUT/

S-VIDEO .

The menu option VIDEO OUTPUT is only selectable when the HDMI output

is deactivated. On this subject see also chapter 10 "Settings in the OSD

menu".

8.3 Connection to a television via video input

(Composite Video)

For this connection variant the television must be equipped with Audio/Video

cinch sockets (Composite Video).

In order to connect the DVD player to a television via Composite Video you

will need

• an audio/video RCA cinch cable (supplied)

• Connect the yellow marked video socket with the yellow VIDEO socket on

the television.

• Connect the audio output sockets AUDIO L/R on the rear panel of the DVD

player to the corresponding audio inputs on the television. Make sure

that the colour markings yellow, red and white correspond.

• For playback select the matching channel on your television Check with

the television's instruction manual on how you can set the AV channel.

• In the OSD menu select the menu option VIDEO/VIDEO OUTPUT/

S-VIDEO.

The menu option VIDEO OUTPUT is only selectable when the HDMI output

is deactivated. On this subject see also chapter 10 "Settings in the OSD

menu".

8.4 Connecting via component signal (YPbPr/YUV)

This connection variant is only possible with very high grade televisions,

LCD/Plasma screens or Video projectors.

Check with the instruction manual of the corresponding playback device to

see if this connections variant is available. It is possible that additional playback

device settings may have to be implemented.

The so called "Component signal" is put out via the YPbPr socket of the DVD

player. Component signals are available in the form of the so called "YUV"

signal (Half image) as well as in the form of the so called "YPbPr" signal

(Full image/Progressive scan).

On this topic, please refer to Section 18. "Glossary / KeyWord Index".

The cable connections are the same in both cases; YPbPr-signal for Progressive

Scan however can only be used if the television (or Video projector), to which

you want to connect the DVD player, is capable of Progressive Scan. If you

are not sure whether the television (or Video projector), to which you want to

connect the DVD player is capable of Progressive Scan and has cinch sockets

available then you can check this by consulting the television's (or Video

projectors's) instruction manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SHDP 5.1 A1 IAN 64330 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SHDP 5.1 A1 IAN 64330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info