Bedienungsanleitung Silvercrest SHDP 5.1 A1 IAN 64330 (Seite 83 von 98) (Englisch, Portugiesisch, Spanisch)

737671

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

- 81 -

ANGLE MARK

-ON If scenes are recorded on a DVD in different perspectives

this will automatically be signified by a camera symbol

displayed on the television screen. Press the ANGLE button

on the remote control to display the various perspectives.

-OFF Deactivate function. No symbol appears on the television

screen.

OSD LANGUAGE

Here you set the language, in which the OSD Menu will be shown on the

display.

CLOSED CAPTIONS

-ON Select this setting if by every playback of a DVD the subtitle

(if present) is to be automatically displayed on the television

screen.

-OFF Select this setting to manually activate the subtitle.

The subtitles can also be set, during playback, with the

SUBTITLE button.

SCREEN SAVER

-ON Screen saver activated. The screen saver will now switch

on when the playback is stopped and no input is made for

approx. 4 minutes.

-OFF Deactivate function.

LAST MEMORY

-ON Select this setting to playback a disc from the previously

halted position after removal and re-insertion.

-OFF Deactivate function. The disc playback starts back at the

begining after removing and then reinserting.

Note:

If the DVD player is turned off with the POWER switch the saved position will not

be preserved.

10.3 Setup menu AUDIO

In this OSD menu you can, for example, carry out settings for the analogue

as well as the digital audio outputs.

ANALOG AUDIO

DOWNMIX

If you use the analogue 5.1 output in this menu you can carry out the

appropriate settings.

-LT/RT Only the left and right channels at the sockets FL and FR

will put out signals.

-STEREO A stereo sound will be put out. Select this setting if you are

not using the analogue 5.1 outputs. The menu options

CENTER SPEAKER and REAR SPEAKER are then not requi-

red and therefore inactive.

GENERAL AUDIO DOLBY VIDEO PREFERENCE

ANALOG AUDIO

DIGITAL AUDIO

CHANNEL DELAY

EQUALIZER

3D PROCESSING

-3D SURROUND Select this setting to produce a virtual surround effect from

a stereo or multi channel sound.

-5.1 CH Select this setting to activate the analogue 5.1 outputs.

FRONT SPEAKER, CENTER SPEAKER, REAR SPEAKER and SUBWOOFER

In these menu inputs you can activate/deactivate the individual speaker types

and set the size.

-LARGE Select this setting if the diameter of the speaker membrane

is greater than 12 cm.

-SMALL Select this setting for smaller speakers.

-OFF Deactivate sound output for these types of speakers

Note:

The menu input FRONT SPEAKER can not be deactivated since the sound

output for the front speakers always remains switched on.

DIALOG In this menu input you can set the dialogue volume (0-20).

D.R.C. (Dynamic Range Control)

This function sets the level of the dynamic range for motion picture soundtracks

which are optimised for Dolby Digital. The function is particularly useful when

listening to surround sound with a low volume level.

-ON Function activated

-OFF Function deactivated.

-AUTO Function (if available) is automatically activated

DIGITAL AUDIO

DIGITAL OUTPUT

In this menu input you can set the SPDIF output signal.

-SPDIF / OFF No digital audio signal is being put out at the sockets

COAXIAL or OPTICAL.

-SPDIF / RAW The crude data of the Dolby Digital sound is put out.

-SPDIF /PCM Select the setting PCM (Pulse Code Modulation) when there

is a connection to a digital amplifier/receiver. Your DVD

player transmits, through the PCM signal, the same audio

formats that are rendered on the disc. In addition an audio

signal will be put out via the sockets FL and FR.

LPCM OUTPUT Select this input to set the sampling frequency for the

processing of the crude data.

-48K: Default setting.

-96K: Only for DVDs with the corresponding sampling frequency.

Note:

The LPCM OUTPUT function is only available if you have set the SPDIF audio

output signal to PCM.

CHANNEL DELAY

Select this menu input to set the channel delay of the individual speakers.

With optimal settings the sound reaches your ears simultaneously from all

directions.

With the control button go to the graphics field beside the input.

With the control buttons or select the speaker.

With the control buttons  you increase/decrease the value in increments

of 10 cm. The maximum setable deviation for the CENTER speaker is 170 cm.

The maximum setable deviation for the SUBWOOFER and the rear speakers

is 510 cm.

Confirm your entry by pressing the ENTER button.

Note:

The channel delay is determined by the front speakers therefore these are not

selectable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SHDP 5.1 A1 IAN 64330 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SHDP 5.1 A1 IAN 64330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info