Bedienungsanleitung Silvercrest SHDP 5.1 A1 IAN 64330 (Seite 86 von 98) (Englisch, Portugiesisch, Spanisch)

737671

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

- 84 -

11. Initial operation of the DVD player

After you have …

• placed the DVD player in a suitable location

• connected the DVD player to a television by one of the designated

connection options

• connected the DVD player, if desired, to a HiFi or Surround system

(analogue/digital) for example a Dolby Digital or DTS receiver

• made the remote control ready for operation by inserting the batteries

• and know how to activate and operate the OSD menu with the remote

control

… the DVD player is ready for operation.

11.1 Switching the DVD player on/off

• Insert the mains power cable into a properly installed mains power socket.

• Place the POWER switch on the rear panel of the device to the ON position.

The DVD player is now in standby mode.

• With the STANDBY button on the remote control or the STANDBY button

on the device you switch the DVD player on and/or back to the standby

mode.

• To switch the DVD player off place the POWER switch on the rear panel of

the device to the OFF position.

Note:

The device has no display indicators when it is switched off or in the standby

mode. In the standby mode only the standby LED will light up in the display.

11.2 Inserting the DVD

To play a disc with the DVD player:

• Switch on your television.

• Make sure that the DVD player is ready for operation.

If the television, the DVD player and possibly other connected devices (i.e. an

audio component) are ready for operation and are switched on and the DVD

player is connected correctly to the television you will now see the Silvercrest

logo on the TV screen

If no disc is inserted into the DVD player's disc tray:

The message NO DISC is displayed on the television screen.

• Open the disc tray by pressing the button OPEN/CLOSE on the remote con-

trol or on the front panel of the DVD player. OPEN is displayed on the

television screen.

• Insert the disc in the disc tray with the inscribed/labled side up.

For two-sided discs: The side you would like to play must face down.

• After you have inserted the disc press the button OPEN/CLOSE on the re-

mote control or on the front panel of the DVD player again to close the

disc tray.

• The contents of the disc will now be loaded; this may take a few seconds.

In the meantime LOADING is displayed on the television screen.

11.3 Inserting memory cards/USB memory sticks with

MP3/WMA/ MPEG4/JPEG data.

Note:

The DVD Player always starts in DVD mode. To read memory cards/USB memory

sticks press repeatedly the USB button on the remote control until the desired

medium is shown on the screen. The DVD player recognizes the data formats

JPEG, MP3, WMA and MPEG4.

In order to insert memory cards of the types SD, MS/MSPro and MMC into

the DVD player:

• Switch on your television.

• Make sure that the DVD player is ready for operation.

If the television, the DVD player and possibly other connected devices (i.e. an

audio component) are ready for operation and are switched on and the DVD

player is connected correctly to the television you will now see the Silvercrest

logo on the TV screen

If no disc is inserted into the DVD player's disc tray: The message NO DISC is

displayed on the television screen.

• Slide the memory card into the memory card slot.

Then proceed with the following steps depending on the type of memory

card that you want the device to read.

Warning!

Always make sure that you insert memory cards into the memory card slot as

described hereafter! Under no circumstances bend or buckle the memory

card when inserting into the memory card slot! Slide the memory card up to

the stop in the memory card slot, with a light pressure.

Allow the memory card to slide in without force:

• Check to make sure that the memory card is one that the DVD player is

capable of reading.

Do not attempt to insert memory cards of another type in the memory

card slot!

• Make sure that you have inserted the memory card into the memory

card slot in the correct manner.

• Under no circumstances attempt to force the memory card into the memory

card slot!

Otherwise the DVD player, memory card and the data on the memory card

could be damaged!

Supported memory card types and capacities

Memory cards of the types SD, MS/MSPro, MMC up to 32 GB (if available)

can be played back..

Note:

Your DVD player can only read storage mediums with several data formats if

each folder contains only one data format.

MultiMediaCard- /SecureDigital memory cards (MMC/SD)

Insert the MMC/SD memory cards with the contacts forward and slide them

straight into the memory card slot.

With this the side of the memory card, on which the contacts are located

must face downwards with the chamfered corner facing to the right.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SHDP 5.1 A1 IAN 64330 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SHDP 5.1 A1 IAN 64330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info