Bedienungsanleitung Silvercrest SHK 100 B2 IAN 75528 (Seite 33 von 36) (Deutsch, Englisch, Holländisch, Französisch)

739758

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

33 GB

tion. The electronic components in the control

of the heating pad cause the control

to heat

up slightly during operation.

Safety system

NOTE: the heating pad is equipped with a safety

system. The electronic sensor technology prevents the

entire surface of the heating pad from overheating

by automatically switching oﬀ in the event of a fault.

If the safety system switches the heating pad oﬀ

automatically as a result of a fault, the temperature

display on the control

will no longer be illumi-

nated when the heating pad is switched on.

Please note that, for safety reasons, the heating

pad must not be used after a fault and must be

returned to the service address indicated.

Operation

NOTE: the heating pad may smell of plastic the

ﬁrst time you use it, but this will disappear after a

short period of time.

Switching on / oﬀ / Selecting

the temperature

To use the device, ﬁrst connect the control unit

to the heating pad by plugging the plug-in

connector

and the plug for the control unit

together (see Fig. B).

Switching on:

Set the control unit

to a setting 1–6 to

switch on the heating pad.

Switching oﬀ:

Set Level 0 on the control

to switch the

heating pad oﬀ.

Selecting the temperature:

Set the highest temperature level (Level 6)

shortly before use. This heats the pad fastest.

If you are going to use the device for a number

of hours, set it to the middle temperature setting

(setting 3).

Temperature levels

Set the required temperature level on the con-

trol

(see Fig. A).

Setting 0: oﬀ

Settings 1+2: minimum heat

Settings 3+4: medium heat

Settings 5+6: maximum heat

Automatic switch-oﬀ

NOTE: The heating pad switches itself oﬀ automat-

ically after about 90minutes. The LED indicator on

the control unit

shows “A”.

First select position “0” and after approx.

5seconds select the required temperature level

to switch the heating pad back on.

Switch the heating pad oﬀ (Level “0”) or take

the mains plug out of the socket if you do not

wish to use the heating pad after automatic

switch-oﬀ.

Cleaning and care

Use the heating pad with the textile cover to

prevent soiling or damage to the heating pad

(particularly if using essential oils and creams).

RISK TO LIFE

FROM ELECTRIC SHOCK! Before

cleaning the heating pad, always

pull the mains plug out of the mains socket and

separate the plug-in connector

from the

plug for the control unit

(see Fig. B).

DANGER OF ELECTRIC SHOCK!

Do not reconnect the control

the heating pad until the

plug-in connector

and the heating pad are

completely dry. There is otherwise a risk of an

electric shock.

Important safety instructions / Safety system / Operation / Cleaning and care Important safety instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SHK 100 B2 IAN 75528 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info