Bedienungsanleitung Silvercrest SHS 12.0 A1 IAN 63817 (Seite 25 von 33) (Englisch, Portugiesisch, Spanisch)

737659

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

26 GB/MT

Operation / Servicing and cleaning / Disposal

j Insert the small brush

snugly into the front

nozzle

Crevice tool

Use this attachment to get into narrow, diﬃcult-to-

access places.

j Insert the crevice tool

snugly into the front

nozzle

Removing attachments:

Simply pull the attachment off the front nozzle

or the extension hose

Switching On / Oﬀ

j Insert the 12 V plug

into the 12 V socket /

cigarette lighter socket of the vehicle, see Fig. C.

j To switch the device on, press the ON / OFF

switch

forwards into the ON position.

j To switch the device oﬀ, press the ON / OFF

switch

back into the OFF position.

j Pull the 12 V plug

out of the 12 V socket

after use.

Tip: If you going to vacuum for a long period, we

recommend that you carry out the cleaning with

the engine running.

Fastening the storage bag to a

surface in your car boot

j You can fasten the storage bag

in a suitable

place, e.g. in the boot of your car. To do this,

press the bag lightly against a suitable textile

surface in your vehicle, for example the back

of the rear seats. The storage bag

is held in

place by two hook and loop fastening strips.

Servicing and cleaning

The device requires no maintenance.

J ATTENTION! Before you clean the device

itself, pull the 12 V plug

out of the 12 V

socket, otherwise there Is a risk of electric shock.

j For the best possible performance, you should

empty the dust container

immediately after

use and when the suction power drops.

j Press the unlocking button

and take the

dust container

out of the housing

j Take out the dust ﬁlter

. You will be able to

clean the dust ﬁlter better if you detach it from the

end seal. To do this, hold the end seal ﬁrmly

and twist the ﬁlter oﬀ carefully anticlockwise

(bayonet ﬁtting). Rinse out the dust ﬁlter

thoroughly in cold water and allow both parts

(ﬁlter and end seal) to dry completely. Attach

the ﬁlter back on to the end seal.

j Empty the dust container

completely.

j Carefully replace the dust ﬁlter

back into

the dust container

. Never use the vacuum

cleaner without the dust ﬁlter

in place.

j Attach the dust container

carefully back

on to the housing

and ensure the two parts

engage.

j Clean all the housing with a soft, dry cloth.

Never use liquids or cleaning agents, as they

may damage the device.

ATTENTION! The front nozzle

must be free

and unobstructed at all times. Blockages can lead

to overheating and damage to the motor.

Disposal

The packaging is composed of environ-

mentally-friendly materials that can be

disposed of at a local recycling centre.

Do not dispose of electrical

devices with the household

rubbish!

In accordance with European Directive 2002 / 96 / EC,

worn out electrical devices must be collected

separately and taken for environmentally compatible

recycling.

Contact your local refuse disposal authority for

more details of how to dispose of your worn out

electrical devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SHS 12.0 A1 IAN 63817 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SHS 12.0 A1 IAN 63817

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info