Bedienungsanleitung Silvercrest SIKP2000B1 - IAN 100060 (Seite 39 von 46) (Deutsch, Englisch, Holländisch, Französisch)

654497

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

8. Operation

DANGER! Risk of fire!

• Heat oil and fat carefully. Overheated

oil and fat is flammable. Do not leave

hot oil or fat unattended.

• DANGER OF EXPLOSION! Never

extinguish burning oil or fat with water.

Smother the flames by closing the cook-

ing vessel with a suitable lid or plate.

Pull out the mains plug.

DANGER! Risk of injury

through burning!

Do not touch the surface of an induc-

tion hot plate, on which a cooking

vessel has been used beforehand.

The temperature of the surface can

still be very high after a cooking ves-

sel has been removed.

8.1 Switching on

1. Place the cooking vessel in the middle

of the cooking zone|2.

2. Insert the mains plug|1 into a wall sock-

et corresponding to the specifications of

the rating plate. An acoustic signal

sounds. At the same time, the display

and control lights are activated shortly

so they can be checked for proper func-

tioning.

The display shows...

… - L -, if the temperature of the cooking

zone is less than 60 °C and

… - H -, if the temperature of the cook-

ing zone is more than 60 °C.

3. Switch on the appliance by touching the

symbol on/off |5.

The control light on/off|4 lights up.

The control light|12 over the symbol

|10 flashes.

W (watt) flashes over the display and

on the display you can see the chosen

power setting (presetting: 1000 watt).

NOTE: if you do not initiate any chang-

es within approx. 30 seconds by touch-

ing the symbols

/ |

8, the appli-

ance switches off automatically.

4. Change the heat output by touching the

symbols |7/ |8 in steps of 200|watt

from 200 - 2000 watt. The heating

phase begins immediately after you

have touched one of the two symbols.

The higher the chosen power, the quick-

er the base of the cooking vessel is heat-

ed up.

By touching the symbols |10, the dis-

play image changes from W (watt)

to|°C. You can now choose the desired

setting also as a temperature specifica-

tion in steps of 20 °C from 60 - 240 °C

(presetting: 120 °C). After the tempera-

ture has been achieved, it is kept at the

specified value.

You can change specified settings at

any time during operation.

You can also touch the symbols uninter-

ruptedly to change the settings.

8.2 Switching off

• Touch the symbol on/off |5, to switch

off the appliance. An acoustic signal

sounds. The symbol -H- is shown in the

display, as the temperature of the cook-

ing zone is more than 60 °C. The cool-

ing fan carries on cooling the appliance

after it has been switched off.

• The appliance automatically stops the

heat output if the cooking vessel is re-

moved from the cooking zone|2 during

the heating phase. The error message

E|1 is shown in the display and an

acoustic signal sounds. If you do not

place the cooking vessel on the hot

place within approx. 10 seconds, the

appliance switches off. The cooling fan

__RP100060_Induktionskochplatte_B2.book Seite 37 Mittwoch, 12. Februar 2014 12:15 12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SIKP2000B1 - IAN 100060 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info