Bedienungsanleitung Silvercrest SKAT 1000 EDS A1 IAN 86115 (Seite 32 von 35) (Deutsch, Englisch, Holländisch, Französisch)

739871

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

- 29 -

• If you wish to deactivate the Timer, press the

button ON/AUTO/OFF 7 again so that the

integrated blue indicator lamp glows constantly.

Cleaning and care

Before cleaning, always remove the plug from the

wall power socket.

Risk of electric shock!

Before you clean the coffee machine you must remove

the plug from the mains power socket.

Attention!

Never submerse the coffee machine in water or other

fluids.

Risk of Burns!

Always wait until the coffee machine has cooled

down before cleaning it.

• Do not use household detergents or sharp/pointed

objects to remove soiling. These could damage

the appliance.

• Wipe the housing of the coffee machine and the

glass carafe with a soft cloth lightly moistened

with a soapy solution.

• After every brewing process remove the filter bag

from the filter holder 2.

• Remove the filter and rinse the filter holder 2

and the glass carafe q under running water.

• In cases of stubborn soiling, clean the filter

holder 2, measuring spoon w and the glass

carafe q in a mild dishwashing solution.

Rinse them off with clear water.

If you do not intend to use the coffee machine for

an extended period, stow the power cable in the

cable shaft at the rear of the coffee machine and

insert the power plug into the designated holes on

the cable shaft.

Removing scale

Remove scale from the coffee machine at regular

intervals.

The required descaling intervals can, subject to water

hardness, be very variable. Scale removal is already

necessary after ca. 30 brewing processes with hard

water, after ca. 60 brewing processes with soft water.

Your local water supplier will inform you about the

water hardness level in your locality.

Use only scale removal products that are suitable

for coffee makers and pay heed to the instructions

for use.

The procedure for scale removal is:

1. Place the scale removal product in the water

tank 3.

2. Insert the amount of water detailed in the usage

instructions for the descaler (max. 12 cups).

3. Press the button ON/AUTO/OFF 7 to start the

brewing process. The integrated red indicator

lamp glows.

4. Wait until the water for approx. 2 cups has passed

through and then stop the brewing process by

pressing twice on the button ON/AUTO/OFF 7.

The integrated blue indicator lamp glows con-

stantly and goes out after approx. 15 seconds.

5. Allow the descaling medium to stand for 15 minutes.

6. Repeat the steps 3 to 5 three times.

7. Then restart the brewing process and wait until

all of the solution has passed through.

8. Rinse the coffee machine through 3 times with

fresh water. All of the descaling medium residues

will then be removed and you can once again

use the coffee machine.

IB_86115_SKAT1000EDSA1_LB2 21.11.2012 12:02 Uhr Seite 29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SKAT 1000 EDS A1 IAN 86115 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info