Bedienungsanleitung Silvercrest SKATG 1050 A1 IAN 61863 (Seite 30 von 42) (Englisch, Italienisch, Portugiesisch, Spanisch)

737551

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

- 28 -

Setting the Time

• Press the button PROG

once, so that CLOCK

appears in the display

• Repeatedly press the button HOUR

for hours,

resp. the button MIN

for minutes, until the correct

time is programmed in. If you hold the buttons

down, the numbers run through faster.

• Press the button PROG

twice. The time

display is now programmed,

• if you do not press any other button for ca. 10

seconds, the indicator CLOCK extinguishes in

the display

and the time is programmed.

Making coffee

• Open the lid

• Using the measuring spoon, place coffee powder

(coarse to medium ground) into the filter

A level measuring spoon of coffee approximates

to ca. 6 gr of coffee powder.

Note:

Should you use finely ground coffee powder it

could block the filter

, water can no longer flow

through it and the coffee maker could overflow!

• Fill the water tank

with the required amount

of water. For this, use the glass jug

with the

scale. When filling the appliance with water, never

exceed the MAX marking in the water tank

• Close the lid

Note:

After brewing, there is always somewhat less coffee

in the glass jug

than the amount of water that

you filled the water tank

with. The coffee powder

absorbs some of the water.

• Place the glass jug

in the coffee maker.

• Press the button ON/AUTO/OFF

once.

The red indicator lamp

glows. The coffee maker

begins the brewing process.

• When the brewing process is complete, the coffee

is kept warm by the keep-warm plate

for two

hours. On the expiry of this period the coffee

maker switches itself.

• Should you wish to switch the coffee maker off

earlier, repeatedly press the button

ON/AUTO/OFF

until the indicator lamps

are extinguished.

Risk of scalding!

After the brewing process the coffee machine must

first cool down, for at least 10 minutes, before you

start another brew. If you do not, there is a risk of

being scalded by escaping steam!

Coffee servings

With this coffee maker you can fill a cup with coffee

using only one hand:

• When there is coffee in the glass jug

, press

and hold your cup against the coffee button

Coffee flows into the cup.

• When the cup is full, remove the cup from the

coffee button

• Any drips that might fall will be caught by the

driptray grill

Note:

Regularly empty and clean the driptray under the drip-

tray grill

. Otherwise, it could overflow.

Note:

If you pour coffee using the coffee button

, a

small amount of coffee will always be left in the

glass jug

You can also pour coffee from the glass jug

the usual manner:

• Lift the glass jug

and then pull it to the front.

IB_61863_SKATG1050A1_LB5 09.11.2010 14:34 Uhr Seite 28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SKATG 1050 A1 IAN 61863 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SKATG 1050 A1 IAN 61863

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info