575429
68
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
65
SKF 2300 B2
GB
Safety instructions
RISK OF ELECTRIC SHOCK
Ensure that the power cable never gets wet or moist when the appliance is
in use. Lay the cable so that it cannot be clamped or damaged in any way.
Connect the appliance to a mains power socket delivering a voltage of
230 V
~
, 50 Hz.
To avoid risks, arrange for defective power plugs and/or cables to be re-
placed at once by qualifi ed technicians or our Customer Service Department.
Never submerge the operating/heating element and the housing
with the power cable in water, and do not clean these components
under running water.
WARNING! RISK OF INJURY!
This appliance is not intended for use by individuals (including children)
with restricted physical, physiological or intellectual abilities or defi ciences
in experience and/or knowledge unless they are supervised by a person
responsible for their safety or receive from this person instruction in how the
appliance is to be used.
Children should be supervised to ensure that they do not play with the
appliance.
Provide a stable location for the appliance.
Do not operate the appliance if it has sustained a fall or is damaged.
Arrange for the appliance to be checked and, if necessary, repaired by
qualifi ed technicians.
Hot steam is generated during the frying process, especially when the lid is
open. Keep a safe distance away from the steam.
Ensure that all parts are completely dry before pouring oil or liquid fat into
the deep fryer. Otherwise, hot oil or fat could splatter out.
Carefully pat all foodstuff s dry before placing them in the deep fryer.
Otherwise, hot oil or fat could splatter out.
Be especially careful with frozen foodstuff s. Remove all ice particles. The
more ice there is on the foodstuff , the more the hot oil or fat will splatter.
Some parts of the appliance become very hot during operation. Touching
these may cause serious burns.
IB_75818_SKF2300B2_LB2.indb 65IB_75818_SKF2300B2_LB2.indb 65 27.08.12 11:2227.08.12 11:22
68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

silvercrest-skf-2300-b2---ian-75818

Suche zurücksetzen

  • ich suche einen Permanent-Metallfilter für Silvercrest SKF 2300 B2 - IAN 75818 als Ersatzteil
    MfG
    Karl-Heinz Meier
    karl-heinzmeier@kabelmail.de Eingereicht am 7-12-2018 11:36

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SKF 2300 B2 - IAN 75818 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info