Bedienungsanleitung Silvercrest SKG 1700 A1 - IAN 90859 (Seite 50 von 58) (Deutsch, Englisch, Holländisch, Französisch)

663548

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

5. How to use

FIRE HAZARD!

• Place the device on a dry, level, non-slip

and heat-resistant surface.

• The device must not be operated close

to flammable liquids or materials, or in

a potentially explosive environment.

Keep at a distance of at least 30 cm

from walls.

NOTE: when in operation for the first time,

some smoke and odour may be generated

by the device. This is related to materials

used on the heating elements during assem-

bly, and is not a defect with the product. En-

sure adequate ventilation.

• Remove all packing material.

• Check to ensure that all parts are pre-

sent and undamaged.

• Clean the device prior to its first

use! (see “Cleaning” on page 50)

1. Open the lid4 of the contact grill up-

wards. Be careful not to raise the lid

any further after it is vertical.

2. Before plugging in the device, check

that both thermostat controls9 +14 are

set to the marking "•".

3. Insert the mains plug6 into a wall sock-

et corresponding to the specifications of

the rating plate.

4. Rotate the thermostat controls9 +14 to

temperature setting 5. The device then

heats up the grill plates12, and the con-

trol lights1 and11 are illuminated.

5. Switch the device off after approx.

15 minutes by turning both thermostat

controls9 +14 to the marking "•".

6. Clean the appliance again. (see

“Cleaning” on page 50)

6. Operation

DANGER! Risk of injury

through burning!

The metal surfaces become very hot

during operation. Only touch the

handles and control elements of the

device during operation.

6.1 Heating up

1. Open the lid4 of the contact grill up-

wards. Be careful not to raise the lid

any further after it is vertical.

2. Grease the grill plates12 with vegeta-

ble oil or butter if appropriate.

3. Place a heat-resistant spill tray (not in-

cluded in scope of delivery) under the

oil/fat runoff of the lower grill plate8.

4. Close the lid4 downwards in order to

close the contact grill.

5. Before plugging in the device, check

that both thermostat controls9 +14 are

set to the marking "•".

6. Insert the mains plug6 into a wall sock-

et corresponding to the specifications of

the rating plate.

7. Turn the thermostat controls9 +14 to

the desired temperature setting 1, 2, 3, 4

or 5.

- Setting 1: thaw

- Setting 2: warm

- Settings 3 and 4: moderate grill set-

tings

- Setting 5: highest grill setting

The device then heats up the grill

plates

, and the control lights

and

are illuminated.

8. Depending on setting, the control lights

and

switch off when the device has

reached the temperature setting selected.

__RP90859_B2.book Seite 48 Montag, 26. August 2013 1:31 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SKG 1700 A1 - IAN 90859 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info