Bedienungsanleitung Silvercrest SKM 350 A1 - IAN 104067 (Seite 51 von 62) (Deutsch, Englisch, Holländisch, Französisch)

600790

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

6. Installation

DANGER! Risk of injury from

cutting!

~ The blade insert8, the grating disk5

and slicing insert4 are sharp. Handle

with care.

~ Only plug the mains plug14 into the

wall socket after the food processor has

been completely assembled.

NOTE: the device is equipped with a safe-

ty switch. The bowl11 can only be

locked with a closed lid3 and can only be

put into operation once it's locked.

Figure A:

place the bowl

on the mo-

tor block

. The symbol 

points to

the bottom marking on the bowl

. Do

not

turn the bowl.

2. Place the drive axle9 in the bowl.

3. Figure E: if required, place the slicing

insert4 / grating disk5 into the insert

holder6.

4. Place the dough blade7, the blade in-

sert8 or the insert holder6 with at-

tached slicing insert4 / grating disk5

on the drive axle9.

5. Dough blade7 / Blade insert8: Fill the

prepared foodstuffs into the bowl11,

as desired.

6. Figure A+B: place the lid3 on the

bowl11. The symbol 2 points to the

top marking on the bowl10.

7. Figure B+C: turn the lid3 in a clock-

wise direction as far as it will go, until

the symbol 2 points to the top mark-

ing on the bowl10.

8. Figures C+D: turn the bowl11 in a

clockwise direction as far as it will go,

until the symbol 16 points to the bot-

tom marking on the bowl12.

9. Insert the mains plug

into a wall sock-

et corresponding to the technical data.

7. Operation

DANGER! Risk of injury from

cutting!

~ T

he insert holder

, the blade insert

and the

dough blade



keep on turning

after the device has been turned off.

Please wait until all parts have come to

a standstill before unlocking the

bowl11 and opening the lid3.

~ The device must never be operated with-

out the bowl11.

WARNING! In order to prevent damage to

the device, interrupt the blending process im-

mediately if the insert holder6, the blade in-

sert8 and the dough blade7 are not turning

or are turning with difficulty. If this happens,

pull out the mains plug14 and check wheth-

er there is something in the bowl11 blocking

movement or whether the food is too tough.

Also check whether the device is assembled

correctly.

CAUTION: depending on the hardness and

consistency of the foodstuffs, do not fill the

bowl11 to the maximum, as the insert hold-

er6, the blade insert8 and the dough

blade7 could get blocked. Pay attention

here to the guideline values for various foods

in the "Processing table" section.

NOTE: for chopping harder foodstuffs, use

the setting P. Work with short pulses (1 pulse:

turn on P for approx. 1 second).

The number

and length of the pulses will depend on the

quantity and consistency of the food

__RP104067_B2.book Seite 49 Montag, 3. November 2014 11:26 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SKM 350 A1 - IAN 104067 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info