Bedienungsanleitung Silvercrest SKM 550 A1 - IAN 89016 (Seite 49 von 55) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

575483

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

- 45 -

• Press the unlocking button

and bring the swivel

arm

into operating position 4 (see chapter

„Operating positions“) (Fig. Ạ).

• Insert the mixing bowl

. The base of the mixing

bowl

must engage in the recesses

on the

appliance.

• Press the unlocking button

and bring the swivel

arm

into operating position 1 (Fig. Ạ).

• Place and hold turn-switch

in position P, until

the drive motor

remains stationary in the park

position (Fig. ạ). Should the drive motor not

move it is already at the park position.

• Press the unlocking button

and bring the swivel

arm

into operating position 4 (Fig. Ạ).

• Depending on the task to be performed, insert

the kneading hooks

, beaters

or whisks

so that they firmly engage in the drive

motor.

Note: The kneading hooks

are fitted with a

pastry deflector. Turn the pastry deflector until

the kneading hooks

can engage (Fig. Ả).

• Place the ingredients to be processed into the

mixing bowl

Note: Pay heed that during the kneading

and/or mixing process the pastry in the mixing

bowl increases in volume, or is pressed upwards

through the rotary movement. Take note of the

table in the chapter „Recommended filling

quantities“.

• Press the unlocking button

down and bring the

swivel arm

to just before operating position 1

(see chapter "Operating positions") (Fig. Ạ),

but do not allow it to engage.

• Slide the lid onto the mixing bowl

• Move the swivel arm

the final distance to

operating position 1 and let it engage, so that

the lid is firmly seated.

• Set the rotary switch

to the desired level.

Risk of injury from rotating parts!

NEVER reach into the mixing bowl

when it is in use.

Only change accessories when the drive motor

is at standstill! After being switched off, the drive motor

continues to run for a short time. The appliance

may only be used when the drive openings not

being utilised are covered with drive protection lids.

In cases of malfunction switch the appliance off and

remove the plug from the wall socket, this will avoid

an unintentional switching-on of the appliance.

Refilling with ingredients

• Turn the appliance off with the rotary switch

• Turn the rotary switch

to P and hold it firmly

until the drive motor

comes to a standstill

(Fig. ạ).

• Press the unlocking button

down and raise

the swivel arm

a little.

• Remove the lid.

• Press the unlocking button

down and bring

the swivel arm

into operating position 5.

• Fill with ingredients.

On task completion

• Turn the appliance off with the rotary switch

• Turn the rotary switch

to P and hold it firmly

until the drive motor

comes to a standstill

(Fig. ạ).

• Press the unlocking button

down and raise

the swivel arm

a little.

• Remove the lid.

• Press the unlocking button

down and bring

the swivel arm

into operating position 4.

• Remove the accessories from the drive motor

• Remove the mixing bowl

• Clean all parts (see chapter "Cleaning and care").

IB_89016_SKM550A1_LB1.qxd 19.02.2013 12:24 Uhr Seite 45

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SKM 550 A1 - IAN 89016 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SKM 550 A1 - IAN 89016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info