Bedienungsanleitung Silvercrest SKRP 1000 A1 IAN 49029 (Seite 43 von 62) (Englisch, Portugiesisch, Spanisch)

737611

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

- 41 -

3. Close the battery compartment 2) by

replacing the cover and then turning the

cover with a coin to the right.

Fixing the kitchen radio beneath a

wall cabinet

With the supplied mounting plate q you can

x the kitchen radio below, for example, a

kitchen wall cabinet:

1. Determine a suitable location for the

kitchen radio.

2. Press the two retaining levers on the back

of the appliance down. Push the mounting

plate q back and remove it.

Hold the mounting plate q under the in-

stallation location. Thereby, the front edge

of the mounting plate q should be ap-

prox. 3.5 cm behind the front of the kitchen

cabinet.

4. Mark the four points for the drillholes with

a pencil.

5. Using a spike, make a small depres-

sion at the marking points. Firmly secure

the mounting plate q with the supplied

screws.

6. Hold the kitchen radio slanted, with the

two recesses in the retaining lugs on the

mounting plate q. Press the kitchen radio

upwards until it audibly engages.

Disassembly

• To disassemble the kitchen radio, press

the two retaining levers at the rear of the

appliance downwards. Then pull the ra-

dio out to the front and remove it.

• Unscrew the screws and remove the as-

sembly plate q.

Setting up the kitchen radio

Do not set the kitchen radio up without the

mounting plate q. Otherwise the speakers are

covered and the sound is scarcely audible.

To t the kitchen radio with the supplied

mounting plate q:

1. Simultaneously press the two retaining

levers on the back of the appliance down.

Push the mounting plate q back and re-

move it.

2. Push the two retainer lugs on the mount-

ing plate q into the recesses on the lower

rear side of the kitchen radio.

3. Press the mounting plate q rmly in the

direction of the appliance rear until it au-

dibly engages.

Disassembly

• Rotate the appliance with the mounting

plate to the top. Hold it in the free space

between the appliance and the mount-

ing plate.

• Lightly pull the mounting plate towards

yourself and upwards in its front area, so

as to free the plate from the front recess-

es. Remove plate from the appliance.

Providing mains power

• When you have completed installation of

the appliance, insert the plug into a mains

power socket. The display r is illuminat-

ed and the appliance tries to receive an

RDS signal to automatically adjust the

time and date.

• For as long as the appliance waits for

the RDS signal, the display r shows

"Please wait for setting thanks". This

can take several minutes.

The Settings menu

Setting the time

Should this not succeed, you must set the

clock manually. For this, the radio cannot be

switched on (= automatic mode).

In automatic mode press the button

MODE/LOCK k once. The time display

blinks.

Press the buttons UP/DOWN 1(/l

to set the time in minute intervals. Pressing

and holding the button changes the time

at ten-minute intervals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SKRP 1000 A1 IAN 49029 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SKRP 1000 A1 IAN 49029

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info