Bedienungsanleitung Silvercrest SKRP 1000 A1 IAN 58821 (Seite 47 von 62) (Englisch, Portugiesisch, Spanisch)

737618

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

- 45 -

Note:

By pressing and holding the button

ON/AOT/OFF 2! you switch to the func-

tion switch-o time (see S. 46 chapter

AOT Switch-o timer).

Manual station selection

Using the button USER/BAND h, select

the required radio frequency: MW (AM)

or VHF (FM).

Briey press the button UP 1( repeat-

edly to search for stations with a higher

frequency than the one shown in the dis-

play r.

3. Briey press the button DOWN l

repeatedly to search for stations with a

lower frequency than the one shown in

the display r.

4. Should the currently selected radio station

transmit RDS data, the -indicator

lights-up in the display r. Then the dis-

play r shows the name of the radio sta-

tion, and the time is updated (if activated

in the settings, see section "Setting Update

function").

Automatic station search

You can have the kitchen radio search for

stations. The kitchen radio searches the fre-

quency range until it nds a station.

1. Press and hold the button UP 1( for two

seconds: the kitchen radio searches for

the station with the next highest frequency.

2. Press and hold the button DOWN l

for two seconds: the kitchen radio search-

es for the station with the next lowest fre-

quency.

Repeat these steps until you have found a

radio station to your liking.

Save and recall a radio station manually

As the appliance can be used by numerous

people, it is tted with user switching, A/B.

Both users can save dierent radio stations.

To switch between users, press and hold the

button USER/BAND h for three seconds.

The selected user "A" or "B" is indicated in

the display.

Each user can save 36 radio stations in the

appliance. 32 x VHF stations and 4 x MW

stations. For saving UKW stations, User "A"

has available:

Preset button M1 t for the save positions

A1 – A8,

Preset button M2 y for the save positions

B1 – B8,

Preset button M3 u for the save positions C1

– C8, and

Preset button M4 i for the save positions

D1 – D8.

Available for User "B" are:

Preset button M1 t for the save positions

11 – 18,

Preset button M2 y for the save positions

21 – 28,

Preset button M3 u for the save positions 31

– 38, and

Preset button M4 i for the save positions

41 – 48.

Press the corresponding preset button once to

address the save position "1", press twice for

"2", etc.

With MW radio stations, each preset button

is for one of the 4 save positions.

1. Setting the user, the desired radio wave-

length and the desired radio station.

Press the button MEM/AMS o. In the

display r the save position indicator and

"MEM" blink.

3. Press one of preset buttons M1–M4

t–i, if necessary repeatedly, to save

the radio station to the desired save posi-

tion. In the display r, the indicator for the

save position selected by you and "MEM"

blink.

Press the button MEM/AMS o once

again. "MEM" and the memory space will

be briey displayed, the station is now

saved.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SKRP 1000 A1 IAN 58821 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SKRP 1000 A1 IAN 58821

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info