Bedienungsanleitung Silvercrest SKW 3 EDS A1 - IAN 64679 (Seite 37 von 42) (Englisch, Portugiesisch, Spanisch)

575342

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

- 35 -

Setup

Place the kitchen scales on a level and slip-free

surface.

Notice

This appliance is equipped with non-slip rubber

feet. As furniture surfaces may be made of a variety

of materials and are treated with many diﬀ erent

types of cleaning agents, it cannot be completely

ruled out that some substances contain ingredients

which may perish the rubber feet and soften them. If

possible place an anti-slip material under the feet of

the appliance.

Operation

Setting the units of measurement

You can choose between the metric and the Anglo-

American (Imperial) system. From 0 g - 999 g the

unit is indicated in g/oz and from 999 g in kg/lb

and g/oz.

Additionally, you can weigh liquids.

In the metric system:

• Milliliter (ml) water

• Milliliter (ml) milk.

In the Anglo-American system:

• Fluid ounces (ﬂ ´oz) water

• Fluid ounces (ﬂ ´oz) milk.

Press the button ON/OFF 1) 5. The scale is

now in the weighing mode. The programmed

unit adjustment appears under or to the right

of the weight indication in the display 6.

To switch between the metric and Anglo-2)

American systems, press the button UNIT 8

until the measurement unit details change.

To alternate within measurement unit systems 3)

between...

g/kg - ml water - ml milk

oz/lb:oz - ﬂ ´oz water - ﬂ ´oz milk

... brieﬂ y press the button UNIT 8 until the desired

measurement unit appears in the display 6.

Notice

Always ﬁ ll liquids into a container before you

measure it!

Weighing

Press the button ON/OFF 1) 5 to the switch the

scales on (weighing mode). The display 6

will light up.

Programme in the desired measurement unit 2)

(see chapter “Setting the units of measure-

ment”).

The scales indicate a weight of “0”. “O” is shown

in the display 6 and on the left.

Place a suitable receptacle on the scales and 3)

press the button Z/T 4. The scales once

again shows “0”, it does not take account of

the weight of the receptacle.

Place the item(s) to be weighed into the receptacle.

Notice

If a button is not pressed or there is not a change

of the current measured weight after approx.30

seconds, the display lighting 6 switches itself oﬀ .

After a further 90 seconds the appliance returns to

the Clock Mode.

Adding & Weighing

(Tare Function)

You can repeatedly set the scale back to “0” in

order to weigh additional partial quantities.

For this, press the button Z/T 1) 4 once. In the

display 6 “TARE” appears on the left. The

scales indicate a weight of “0” again.

Place the additional item(s) to be weighed 2)

into the receptacle.

In the display 6 the weight of the newly added

item(s) is shown.

IB_64679_SKW3EDSA1_LB5.indb Abs1:35IB_64679_SKW3EDSA1_LB5.indb Abs1:35 16.05.2011 8:55:30 Uhr16.05.2011 8:55:30 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SKW 3 EDS A1 - IAN 64679 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SKW 3 EDS A1 - IAN 64679

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info