739894
55
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
GB
52
SLB 1.2 B2
Never make a knot in the connection cable and do not bind it
together with other cables. The power cable should be routed
so that it cannot be stepped on or tripped over.
This device is not intended for use by persons (including children)
with limited physical, physiological or intellectual abilities or lack
of experience and/or knowledge unless they are supervised by a
person who is responsible for their safety, or receive instructions
from this person on how to use the device.
Children should be supervised to ensure that they do not play
with the device.
Only have repairs carried out by authorised specialist companies
or the Customer Service department. Improper repairs can pose
signifi cant risks to the user. Warranty claims also become void.
Repairs to the device during the warranty period may only be
carried out by a customer service department authorised by the
manufacturer. Otherwise no additional warranty claims can be
considered for subsequent damage.
Defective components must always be replaced with original
replacement parts. It can only be guaranteed that safety require-
ments are complied with if original replacement parts are used.
Never attempt to open the device. There are no parts which can
be cleaned or maintained inside the device. Do not perform any
modifi cations or changes to the device yourself.
Never operate the device in the vicinity of naked fl ames, and do
not place candles on or next to the device.
Protect the device from moisture, spray and dripping water and
the penetration of liquids. Do not place objects containing liquid
(e.g. fl ower vases) on or near the device.
If liquid penetrates the device, switch it off , disconnect it from
the power supply and have it inspected by qualifi ed specialists
before using it again.
If the device is moved from cold to warm surroundings, wait for
approx. 2 hours until the device has reached the ambient tem-
perature before switching it on.
If you are using a USB power supply, the mains socket used must
always be easily accessible so that the USB power supply can
be quickly disconnected from the socket in a hazardous situation.
IB_89655_SLB1.2B2_LB1.indb 52IB_89655_SLB1.2B2_LB1.indb 52 16.05.13 11:0216.05.13 11:02
55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SLB 1.2 B2 IAN 89655 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info