806100
12
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
GB12
Getting ready
Winding the lower thread
A. Place the spool (m) on the spool pin (15)
and hold it in place with a spool pin cap (r).
- Small spool pin cap for thin threads
- Large spool pin cap for thick threads
B. Or place the secondary spool pin (q) on
to the hole for the second spool pin (22).
Pull the thread from the spool into the
thread guide, and up to the bobbin thread
guide (2).
Pull the thread from the inside through a
hole of the empty bobbin (g). Place the
bobbin (g) on the bobbin winder spindle
(14) and then push to the right into the
lling position.
Hold the end of the thread. Press the
pedal (t). Release the pedal (t) after a few
turns. Release the thread and cut as close
as possible to the bobbin (t). Press the
pedal (t) again.
Once the bobbin is full, it rotates more
slowly. Release the pedal (t). Replace
the bobbin (g) into sewing position and
remove it.
Note:
If the bobbin winder spindle (14) is in the
winding position, the sewing process is
automatically interrupted. To sew, push
the bobbin winder spindle (14) to the left
(sewing position).
Inserting the bobbin
Important:
Turn the power switch (20) to off ("O").
When inserting or removing the bobbin (g),
the needle must be fully raised.
1. Open the hinged cover.
2. Pull the bobbin case tab (A) and remove
the bobbin case. Hold the bobbin case
with one hand.
3. Insert the bobbin so that the thread runs
in a clockwise direction (arrow).
4. Pull the thread into the slit and under
the tension spring.
5. Hold the bobbin case between the index
nger and thumb on the bobbin case
tab (A).
6. Insert it into the shuttle race.
Note :
The method of bringing up the lower
thread is explained on page 15.
A
B
5 6
2
34
1
A
A
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SNM33C1 - IAN 315501 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Silvercrest SNM33C1 - IAN 315501

Silvercrest SNM33C1 - IAN 315501 Bedienungsanleitung - Holländisch, Dänisch, Französisch - 30 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info