Bedienungsanleitung Silvercrest SPU 900 A2 - IAN 90514 (Seite 67 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

651496

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

- 64 -

4. Press the buttons DOWN/UP i/o to set

a diﬀerent time.

Press the MODE/LOCK button

eonce

again to close adjustment.

Timer function

1. Press the NAP/USER k button. The NAP

display appears in display g and the

minute display 10 ﬂashes.

2. Use the DOWN/UP i/o button to set

the required number of minutes (1 to 120

min.).

3. Press the button NAP/USER k once

again to start the Timer. In the display g

the remaining time is indicated.

4. Should the time be expired, the timer

signal will sound for about 10 minutes,

the NAP indicator ﬂashes and the time is

displayed.

5. Press any button to end the alarm.

6. If you wish to end the Timer function

before the alarm, press and hold the

button NAP/USER k for one second.

Alarm function (Alarm 1 to 4)

You can programme in up to four alarm

times on your radio alarm. If a button is not

pressed within approx. 15 seconds, the ap-

pliance saves the adjustment and then leaves

the programming mode.

1. With the radio switched oﬀ, press the

AL.SET button a to call up the alarm

function. Using the PRESET/ALARM +/–

buttons s/d, select the desired alarm

memory position. In the display g the last

set alarm time and the symbol for the type

of alarm (radio or signal tone) blinks.

2. Press the buttons DOWN/UP i/o to set

the desired alarm time. Pressing and hold-

ing down one of the buttons DOWN/UP

i/o changes the alarm time in quick suc-

cession.

3. Press the button AL.SET a until the desired

alarm function (see table) is indicated in

the display g.

Alarm function Symbol in the

display g

Acoustic signal

Radio

Switched oﬀ no symbol

4. Press the button SNOOZE/DIMMER y

to set the weekdays on which you require

the alarm function: You can choose be-

tween “workdays” (MON, TUE, WED,

THU, FRI), “weekends” (SAT, SUN) and

“every day” (MON, TUE, WED, THU,

FRI, SAT, SUN).

5. Hold the button SNOOZE/DIMMER y

pressed down for 2 seconds when you

want to be woken on a speciﬁc weekday.

To programme this weekday, repeatedly

press the SNOOZE/DIMMER button y.

Orientate yourself on the weekday indica-

tor at the top right in the display:

MON: = Monday

TUE = Tuesday

WED = Wednesday

THU = Thursday

FRI = Friday

SAT = Saturday

SUN = Sunday

6. To return to the selection of workdays,

weekends or whole weeks, once again

hold the SNOOZE/DIMMER button y

pressed down for 2 seconds.

7. After approx. 15 seconds the display g

returns to time indication. The adjustment

for the alarm function is now saved and

will be shown.

8. If needed, programme the other memory

positions for alarm times as detailed above.

9. If you wish to be woken by the radio func-

tion, switch the radio on now and select

the desired radio station. Then adjust the

sound volume to the maximum to be

achieved during the alarm procedure.

BDA_SPU 900 A2 - IAN-90514_1_en.indd 64 22.07.2013 13:42:56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SPU 900 A2 - IAN 90514 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info