Bedienungsanleitung Silvercrest SRK 700 A1 - IAN 69906 (Seite 6 von 18) (Englisch)

575524

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

- 4 -

Note:

If the cooking bowl 4 is damaged, discontinue all

further use! Due to the damage it may be that the

safety shut-off of the appliance has triggered and

the appliance does not allow itself to be switched on.

3. Measure the desired quantity of rice using the

supplied measuring cup.

As a general rule: A level measuring cup - filled

with rice - yeilds a portion for one person. Deter-

mine the right quantity of rice and water for you

in a few cooking attempts.

4. Thoroughly wash and sieve the loose rice. Nu-

trients will be lost with this, however, if you do

not wash the rice this could lead to poor cooking

results and elevated foam and steam formation

in the cooking bowl 4. Also, always pay heed

to the preparation instructions of the rice produ-

cer.

5. After washing it, pour the rice into the cooking

bowl 4 and smooth it out.

Note:

Place at least 2 measuring beakers of rice into the

rice cooker! A lesser volume of rice could cause

inferior cooking results!

6. Then add water in the cooking bowl 4 as per

the following cup markings:

• 2 Measuring beakers of rice =

Water up to cup marking "2"

• 4 Measuring beakers of rice =

Water up to cup marking "4"

• 6 Measuring beakers of rice =

Water up to cup marking "6"

• 8 Measuring beakers of rice =

Water up to cup marking "8"

• 10 Measuring beakers of rice =

Water up to cup marking "10"

Subject to taste preferences, salt can also be

added to the rice.

Note:

If you use warm water the cooking time can be

shortened. In this case, use somewhat less water

than is given on the cup marking in the cooking

bowl 4.

Note:

Subject to the type/sort of rice being prepared, it

could be that you may have to insert a little more or

less water to achieve an optimal cooking result.

Vary the amount of water in accordance with your

individual experiences and personal preference.

7. When the cooking bowl 4 is full, place it back

in the rice cooker housing.

Ensure that...

- ... to avoid dirtying the cooking area, check to

make sure there is no moisture or rice located on

the outside of the cooking bowl 4. If necessary,

wipe the outside with a clean cloth.

- ... the cooking bowl 4 is not skewed or tilted

when being placed in the rice cooker housing.

Always insert the cooking bowl 4 correctly and

precisely into the rice cooker housing. If you do

not, it may be that the safety shut-off of the

appliance will trigger and the appliance does

not allow itself to be switched on.

Note:

This appliance is fitted with a safety switch: the cooking

process cannot be started with an empty cooking

bowl 4.

8. Close the appliance lid 2.

9. Insert the power cable into the socket 8 on

the side of the appliance.

10. Insert the power plug into a properly installed

power socket. The yellow control lamp 5

glows.

IB_69906_SRK700A1_LB6 30.08.2011 15:44 Uhr Seite 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SRK 700 A1 - IAN 69906 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SRK 700 A1 - IAN 69906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info