Bedienungsanleitung Silvercrest SRNH 100 E3 - IAN 275409 (Seite 10 von 41) (Deutsch, Englisch, Holländisch, Französisch)

658884

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

10 GB/IE/NI

Switching off:

Set the control unit

to 0 to switch oﬀ the

heating pad.

Note: The operating display

will switch oﬀ.

Selecting the temperature:

Just before using the heating pad, set it to the

highest temperature setting (setting 6). This will

cause the heating pad to warm up quickly.

When using the heating pad for several hours, set

it to the lowest temperature setting (setting 1).

When opera-

ting the heating pad for several

hours,

we commend setting the control unit

to the lowest setting to prevent

overheating and potential burns to

the part of the body heat is applied

to.

Temperature levels

Set the required temperature level on the con-

trol unit

(see ﬁg. A).

Level 0: oﬀ

Level 1: minimum heat

Level 2–5: customised heat

Level 6: maximum heat

Automatic switch-oﬀ

Note: The heating pad switches itself oﬀ automati-

cally after about 90 minutes. The function display

then starts to ﬂash.

Then select the setting 0 and after about 5 se-

conds, reset the heating pad to the desired

temperature setting to switch it on again.

If the heating pad is no longer used after

the timer expires:

– switch oﬀ the heating pad (setting 0),

– unplug from the socket,

– disconnect the plug-in connection

, i.e. the

control unit

, from the heating pad.

Cleaning and care

DANGER TO

IFE BY ELECTRIC SHOCK! Alwa

remove the mains plug from the so

cket

and the plug-in connector

with the control

unit

from the heating pad (see ﬁg. B) before

cleaning the heating pad. Otherwise there is a

risk of electric shock.

Use a dry, lint-free cloth for control unit

clea-

ning and care.

RISK OF DAMAGE TO THE PRO-

DUCT OR PROPERTY! Never im-

merse the control unit

in water or

other liquids. It may otherwise be damaged.

If the heating pad is slightly soiled, use a dam-

pened cloth and a little liquid mild detergent, if

necessary.

RISK OF DAMAGE TO THE

PRODUCT OR PROPERTY! Do

not use chemical cleaning or scouring

agents to clean the heating pad and control unit

. The heating pad and control unit

may

otherwise be damaged.

he heating pad is machine-washab

le.

Set the washing machine at an extra

washing cycle for delicate items at

30 °C.

For ecological reasons, please only wash the

heating pad together with other textiles. Use a

mild laundry detergent according to the

manufacturer’s instructions.

Please note that frequent washing will cause

wear to the heating pad. It should therefore be

washed no more than max. 10 times in a

washing

machine throughout its useful life.

RISK OF DAMAGE TO THE

PRODUCT OR PROPERTY!

Please

note that the heating pad may not

Cleaning and care / Storage / Disposal / Warranty / Service centreStart-up / Cleaning and care

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SRNH 100 E3 - IAN 275409 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info