Bedienungsanleitung Silvercrest SSR 1080 A1 IAN 61193 (Seite 14 von 53) (Englisch)

738646

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

Digital HD Satellite Receiver SSR 1080 A1

English - 12

In order to open the advanced menu you may need a password. The factory-default

password is: 0000.

If no hard disk information is shown, you will need to format the hard disk with a compatible file

system for your satellite receiver. To do this, press the Menu button (22) and then press the S or T

navigation buttons (23) to select the "Expert Mode" item and finally select "Media". Select the "HDD

Format" item. Next press OK (34) to confirm and another window opens. If the hard disk is divided

into multiple partitions, you can choose which partition should be formatted. Select the option “HDD

Format” and press OK (34) to confirm the start of formatting. A safety prompt will appear. Select

whether you want to format your hard disk using the "FAT" or the "NTFS" file system, or select

"Cancel" to cancel.

CAUTION! Formatting the hard disk will erase all data stored on it. After the hard

disk has been formatted, press the EXIT button (33) to quit the menu and then select

"HDD Information". Here you can display the available storage on the hard disk. To

avoid any loss of data, you should never disconnect the hard disk from the satellite

receiver while the devices are on. First switch the satellite receiver to Standby mode

before disconnecting the hard disk.

Targa does not assume any liability for loss of data or damage resulting from

the use of the USB interface.

The total recording time depends on the size of the hard disk but also on the recorded programmes.

HDMI Connection

Use an HDMI cable to connect your satellite receiver to the TV set. This connection type guarantees

an optimum and loss-free transmission of the video and audio signals to the TV Set. As soon as a TV

set is connected to the satellite receiver using an HDMI cable, your satellite receiver will toggle

automatically to the HDMI signal output.

You can press the MODE button (37) to optimise the screen resolution for HDMI mode. Please note

that the picture may disappear when switching the resolution. So that you are aware of the current

resolution setting, the resolution will be shown briefly on the display (7) of the device (e.g. 480i,

720P, 1080). For optimum resolution on a modern flat-screen display we recommend using the

1080i_50 or 720p_50 setting.

When establishing this connection type, we recommend that you use both a SCART (Euro AV) as

well as an HDMI cable, as many TV sets do not have the HDMI input enabled by default. Via the

conventional SCART cable you will always be able to access the setup menus and customise

settings if no picture appears on the display.

Video and Audio Signal Connection:

All required settings can be found in the section "System Setup" (see page 25).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SSR 1080 A1 IAN 61193 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SSR 1080 A1 IAN 61193

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info