Bedienungsanleitung Silvercrest SSR 576 A1 (Seite 12 von 183) (Deutsch, Englisch, Dänisch, Schwedisch, Finnisch)

472121

Zoom out

Zoom in

Vorherige Seite

1/183

Nächste Seite

Digital SD Sat Receiver SSR 576 A1

English - 10

Connecting the Satellite Receiver

You should only connect your satellite receiver to the mains once all other cable

connections have been made. This will avoid any accidental damage to the satellite

receiver or any external devices.

A Connect the LNB of the satellite antenna to the LNB Input (12) of your satellite receiver.*

B Connect the TV set (or beamer) to the HDMI connector (15) of your satellite receiver (see next

chapter – HDMI Connection).

C If your TV set (or beamer) does not feature an HDMI port, you can use the TV SCART (19)

terminal to connect it to the satellite receiver.

D Furthermore, you can connect your TV set (or beamer) to the S-VIDEO (17) or Video output (16)

of your satellite receiver.

E You can use the VCR-SCART (20) output of your satellite receiver to connect a VCR or DVD

recorder.

F In order to obtain good sound quality, you can use the AUDIO L/R stereo outputs (18) of your

satellite receiver to connect an external Hifi amplifier.

G If your amplifier features a coaxial or optical SPDIF connector, you can use the coaxial S/PDIF

(13) or optical S/PDIF (14) terminal to connect it to the satellite receiver.

H Connect the power cord (21) to a wall outlet and turn the power switch (22) to position ON after

you have finished connecting all cables.

*If you want to use the device with satellite systems capable of receiving more than one satellite, a

DiSEqC

LNB must be used instead of a universal LNB.

HDMI Connection

Use an HDMI cable to connect your satellite receiver to the TV set. This connection type guarantees

an optimum and loss-free transmission of the video and audio signals to the TV Set. As soon as a TV

set is connected to the satellite receiver using an HDMI cable, your satellite receiver will toggle

automatically to the HDMI signal output. Next enable the corresponding HDMI input on your TV. See

the User's Manual for your TV set.

You can use the satellite receiver menus to optimise the screen resolution for HDMI mode. You can

choose from the following resolutions: 576i DVI, 576p DVI, 576i, 576p, 720p and 1080i. For optimum

resolution on a modern flat-screen display we recommend using the 1080i or 576i setting. Please

note that the picture may disappear when switching the resolution. If the picture remains blank, the

resolution you have set is probably not supported by your TV. In this case, use a SCART cable to

connect your satellite receiver to the TV set in order to gain access to the menus again.

Video and Audio Signal Connection:

All required settings can be found in the section Edit Settings | Signal Output (see page 23).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SSR 576 A1 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SSR 576 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info