Bedienungsanleitung Silvercrest STGG 1800 A1 - IAN 103845 (Seite 25 von 36) (Deutsch, Englisch)

576714

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

STGG 1800 A1

Assembly and setting up

WARNING! RISK OF FIRE!

► Never place the appliance underneath wall

cupboards or next to curtains, cupboard

walls or other ﬂ ammable objects.

► Set up the appliance at least 70 cm from any

ﬂ ammable materials (e.g. curtains).

► Always place the appliance on a heat-resistant

surface.

► Set up the appliance with its rear side directly

against the wall. When doing so, ensure that

the wall is made of heat-resistant material

and that the lid 3 can open fully.

1) Remove all of the parts from the box and

remove the packaging material and any

protective ﬁ lm.

2) Clean all components as described in Chapter

“Cleaning and care”. Ensure that all parts are

completely dry.

3) Place the appliance on a heat-resistant, clean

and level surface.

4) Place the drip tray 6 in the frame 5 so that

it sits in the recess to the left of the centre.

ATTENTION! DAMAGE TO PROPERTY!

►

Never use the appliance without the drip

tray 6! Otherwise hot fat and other hot

liquids will drip down from the appliance

onto the surface below.

5) Place the griddle 1 onto the frame 5.

Ensure that the socket 2 is on the right side.

The griddle 1 must sit correctly in the frame

otherwise the thermostat 9 cannot be con-

nected to the socket 2.

6) Push the hinges of the lid 3 into the recess on

the frame 5 and close the lid 3.

7) Connect the thermostat 9 with the socket 2

on the appliance. Ensure that the thermostat

9 is pushed up to the stop in the socket 2.

Otherwise the appliance cannot heat up!

Before ﬁ rst use

1) Open the lid 3 by pushing up the catch on

the handle 7 and, at the same time, pulling

the lid 3 upwards.

Open the lid 3 until the hinges slide down

into the hinge guides 4 and the lid 3 is ﬁ rmly

in place.

2) Wipe the griddle 1 with a moist cloth.

3) Lightly grease the griddle 1 with fat or oil that

is suitable for baking/grilling. This allows any

cooking residues on the griddle 1 to be more

easily removed.

4) Close the lid 3 by lifting it lightly into the

hinge guide 4 so that it can be folded shut.

5) Insert the plug in a mains power socket and

set the temperature control 8 to level 5. The

appliance will heat up.

6) Wait for 10 minutes.

7) Then disconnect the plug and allow the appli-

ance to cool down.

NOTE

►

The ﬁ rst time the appliance heats up, a small

amount of smoke and smell may be generated

due to production-related residues. This is

completely normal and is not dangerous.

Provide suﬃ cient ventilation by opening a

window, for example.

8) Wipe the griddle 1 with a damp cloth after

cooling.

9) Clean the drip tray 6 as described in Chapter

“Cleaning and care”.

10) Ensure that all parts are completely dry before

operating the appliance.

The appliance is now ready for use.

IB_103845_STGG1800A1_DE.indb 22 30.10.14 16:34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest STGG 1800 A1 - IAN 103845 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info