Bedienungsanleitung Silvercrest STL 15 A1 (Seite 1 von 6) (Englisch)

472093

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Multi-function speaker STL 1.5 A1

Usage and safety instructions

V 1.46

IAN 68596

Mat.-Nr: 1671409

Read this user manual carefully before using the

device for the first time and observe all the

instructions, even if you are familiar with the use of

electronic devices. Keep the manual safe and

always pass it on with the device.

This symbol in the following text indicates hazards

which can cause personal injury or damage to

equipment.

Supplied items

 SilverCrest STL 1.5 A1 multi-function speaker

 Mini-USB to USB cable

Safety instructions

Intended use

The SilverCrest STL 1.5 A1 multi-function speaker is

used in accordance with its intended purpose when it is

used exclusively for playback of audio files stored on

microSD cards or if it is connected to an audio source

with the 3.5mm audio cable. Any other use is not as

intended.

The manufacturer does not assume any liability if:

 The multi-function speaker is not used as intended.

 The multi-function speaker is damaged, incomplete

or modified prior to connection and use.

This is an electronic entertainment device. It may only

be used for private purposes, but not for industrial or

commercial purposes.

General safety information

 Keep electric devices away from children or persons

with mental or physical limitations! Never let such

persons use electric devices without supervision.

They cannot always recognise possible hazards.



Small parts can be fatal if swallowed. Also note that

there is a risk of suffocation if air passages are

blocked by the plastic packaging.



If smoke is produced, or there are any unusual

sounds or smells, turn the multi-function speaker off

immediately.

In these cases the device should not be

used until it has been inspected by authorised

service personnel.

Operational safety

 Never use any adapter plugs or extension cables

which are damaged or which do not comply with valid

safety standards.

 To disconnect a cable always hold the multi-function

speaker and pull the plug, not the cable. Ensure that

the cable is not kinked and does not cause an

obstruction.

 If the multi-function speaker is exposed to extreme

temperature fluctuations, condensation can lead to

the accumulation of moisture which can cause a

short circuit. In this case wait until the multi-function

speaker has reached ambient temperature before

use.

Operating environment/Environmental

conditions

 Protect the multi-function speaker against moisture,

vibration, dust, heat and direct sunlight. It could

otherwise become damaged.

Controls and indicators

Item

Function, operation

Lower the volume / Previous track; hold the button

down to lower the volume. Press the button briefly to

select the previous track.

udio connection; you can connect an external audio

source with the 3.5mm jack plug. In this mode

remove any inserted microSD card before switching

the device on. Audio output is switched on and off

with button 3 and the volume is controlled with

buttons 1 and 4.

On/off button / Playback / Pause; hold the button

down to switch the device on and off. Press the

button briefly when the device is switched on to

pause or resume playback.

Increase the volume / Next track; hold the button

down to increase the volume. Press the button

briefly to select the next track.

Headphone connection; insert the 3.5mm jack plug

of headphones into this socket. The loudspeaker (8)

is automatically muted and the audio output is only

heard on the connected headphones.

USB connection; insert the smaller plug of the

supplied USB cable (mini-USB to USB cable) into

this socket when the multi-function speaker is

switched off and insert the large plug into a USB

socket on your PC or notebook (switch the PC or

notebook on first). The multi-function speaker is then

charging. The power indicator (10) flashes green

during charging. If you would like to access the

content of a card in the microSD slot (9), the device

must be switched on before it is connected via USB.

The operating system automatically recognises the

device and a free drive letter is assigned. The power

indicator (10) then flashes orange and you can

access the content of the microSD card. In this

operating mode (USB audio mode) the device is

charging and the audio files on your PC or notebook

are output on the multi-function speaker.

Furthermore you can control the Windows

Media

Player with the buttons of the multi-function speaker.

Sound box; you can increase the size of the sound

box. To this purpose turn the upper section of the

multi-function speaker anti-clockwise until the locking

mechanism is released and the sound box is

enlarged. To reduce the size of the sound box, push

the multi-function speaker together and turn the

upper section clockwise until it locks in place.

8 Loudspeaker

MicroSD slot; you can play music from a microSD

card. To this purpose push a microSD card into the

slot (pointing towards the loudspeaker with the

contacts facing upwards) until it engages. To remove

the card, press the microSD card lightly. The card is

ejected slightly and can be pulled out.

10 Power indicator (LED);

Lights up orange:

 Device switched on for playback of external audio

sources

Flashes orange:

 Playback from the microSD card

 Operation in USB audio mode

Flashes green:

 Charging

Lights up green:

 Battery fully charged

Eyelet; provided for attachment of a strap (not

supplied).

Silvercrest STL 15 A1 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest STL 15 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info