Bedienungsanleitung Silvercrest SWC 100 A1 IAN 75375 (Seite 32 von 36) (Deutsch, Englisch, Holländisch, Französisch)

739735

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

33 GB

Avoid damage to the heated

shawl / wrap!

Please ensure that you:

· Only connect the heated shawl / wrap to

the voltage indicated on the label,

· only use the heated shawl / wrap in conjunc-

tion with the control

indicated on the

heated shawl / wrap (label),

do not switch the heated shawl /

wrap on if it is folded or bunched

up,

do not squeeze or jam the heated shawl / wrap,

· do not cause any sharp creases in the heated

shawl / wrap,

· do not place any objects, e.g. suitcase or

washing basket, on the heated shawl /

wrap when it is switched on,

· do not place any source of heat e.g. a hot

water bottle or similar items onto the warp

when it is switched on.

Ignoring this advice may damage the heated

shawl / wrap.

Do not cover the control

and do not place

it on the heated shawl / wrap when the heated

shawl / wrap is in operation. The electronic

components in the control

of the heated

shawl / wrap cause the control

to heat up

slightly during operation.

Do not pull, twist or crease the cables. Ignor-

ing this advice may damage the heated

shawl / wrap.

Safety system

Note: the heated shawl / wrap is equipped with a

safety system. The electronic sensor technology

prevents the entire surface of the heated shawl /

wrap from overheating by automatically switching

oﬀ in the event of a fault.

If the safety system switches the heated shawl /

wrap oﬀ automatically as a result of a fault, the

function display on the control

will no longer

light up, even when heated shawl / wrap is

switched on.

Please note that, for safety reasons, the heated

shawl / wrap must not be used after a fault and

must be returned to the service address

indicated.

Preparing the product for use

Note: The heated shawl / wrap may smell of plas-

tic the ﬁrst time you use it, but this will disappear af-

ter a short period of time.

Lay the heated shawl / wrap over your shoul-

ders in such a way that the dark side is facing

your body.

If necessary, fasten the press studs

on the

front side (ﬁg. B). There are additional press

studs

in the arm region (ﬁg. B).

To begin, ﬁrst connect the control

to the

warp with the plug-in connector

(see ﬁg. C).

Switching on / oﬀ /

Selecting the temperature

Switching on:

Set Level 1, 2, 3, 4, 5 or 6 on the control

switch the heated shawl / wrap on.

Note: The function indicator

illuminates

after the heated shawl / wrap is switched on.

Switching off:

Set Level 0 on the control

to switch the

heated shawl / wrap oﬀ.

Note: The function indicator

ceases to

illuminate.

Selecting the temperature:

Just before using the heated shawl / wrap, set it

to the highest temperature setting (level 6). This

will cause the heated shawl / wrap to warm up

quickly.

If you wish to leave the heated shawl / wrap

on for several hours, set the lowest temperature

(level 1).

Important safety instructions / Safety system / Preparing the product for use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SWC 100 A1 IAN 75375 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info