Bedienungsanleitung Silvercrest SWKD 3000 A1 IAN 67146 (Seite 32 von 42) (Englisch, Portugiesisch, Spanisch)

738922

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

- 30 -

As soon as the water temperature falls below the set

temperature, the kettle heats up again automatical-

ly. The LED

of the currently selected temperature

setting blinks until the selected temperature has

been regained. Afterwards, it glows constantly

again.

After 30 minutes the kettle switches itself off. Two

signal tones sound. All LEDs extinguish.

Information

- At any time you can cancel the temperature main-

tenance of the water by pressing the On/Off

button

or the KEEP WARM button

- Once you lift the kettle from the base

, the

appliance switches all functions off.

Note

Do not let the water stand in the kettle for longer

than is absolutely necessary. That would lead to

scale deposits. Pour away the water that is no

longer required.

Cleaning and Care



Danger

Do not open any part of the housing. There are no

user-serviceable elements inside. An open housing

increases the risk of receiving a potentially fatal

electric shock.

Under NO circumstances may the appliance

parts be immersed in water or other liquids!

Should residual liquid be on "live" parts during

use, there would be the risk of receiving a

potentially fatal electric shock.

Before cleaning the appliance, ....

• first disconnect the plug from the mains power

socket and allow the appliance to cool down.

• Clean all exterior surfaces and the power cable

with a slightly moist cloth. In all cases, dry the

appliance well before using it again.

• To clean the inside of the kettle, thoroughly rinse

it out with water and then pour the water away.

• Do not use detergents, abrasives or solvents.

These can damage the appliance.

In the event of scale deposits:

• Before descaling, remove the pourer sieve

(see chapter "Removing/replacing the pourer

sieve").

• Use a descaler designed for household appliances

(e.g. for coffee machines). Pay heed to the in-

structions given for the descaler.

• For the stainless steel container bottom, you can

use a suitable product from a specialist dealer.

Removing/replacing the pouring sieve

• Open the lid.

• Press the tab at the upper end of the pourer

sieve

down and, simultaneously, push the

pourer sieve to the inside.

• You can then lift the pourer sieve

up and out

of its holder.

• Clean the pourer sieve

with a lightly moistened

dishcloth and under running water.

• After cleaning, insert the pourer sieve

from

above and then push it forward so that the tab

locks into place. Ensure that the pourer sieve

grips into the holder at the lower end and is

firmly seated.

• Should any scale deposits have set on the pourer

sieve

, soak it for a few hours in a water-vinegar

solution at a ratio of 6:1. The scale deposits will

dissolve themselves. Rinse the pourer sieve

with copious amounts of clear water.

IB_67146_SWKD3000A1_LB5 29.06.2011 9:52 Uhr Seite 30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SWKD 3000 A1 IAN 67146 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SWKD 3000 A1 IAN 67146

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info