Bedienungsanleitung Silvercrest SWKT 3000 A1 IAN 56541 (Seite 24 von 32) (Englisch, Italienisch, Portugiesisch, Spanisch)

737529

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

- 22 -

In order to keep the water warm after bringing it to

a boil, set the temperature regulator yin the keep

warm range.

Press the ON/OFF switch edown, until it snaps in.

Temperature regulator in the keep warm range

The left end of the keep warm range indicates the

lower temperature. The right end of the keep warm

range indicates the higher temperature.

(The water does not start boiling in the keep warm

range!).

• After reaching the desired temperature, the ap-

pliance switches off the heating process. The

ON/OFF switch eand the operating lights r

remain switched on.

Because the device is equipped with a heat

maintenance function, the device automatically

begins reheating as soon as the water tempe-

rature falls below the set temperature.

The appliance heats until the desired tempera-

ture is reached. Make sure that the appliance

does not automatically switch on to the keep

warm function. Therefore, do not leave the

appliance unsupervised!

• As soon as the kettle uis lifted from the base

t, the ON/OFF switch ejumps out and the

operating lights rswitch off.

• In order to halt the heating process, push the

ON/OFF switch eup again. The operating

light rgoes out then as well.

Avoid setting the temperature regulator yin

the transition range, as the water can start boi-

ling on account of varying filling levels.

Cleaning and Care



Danger!: Do not open any part of the

housing. There are no operating elements

inside. An open housing can create the risk

of a life-threatening electrical shock.

Never submerse any parts of the device in

water or other liquids! This can create the

risk of a life-threatening electrical shock if

residual liquid comes into contact with

powered components.

Before cleaning the device, ....

• First pull the power plug out of the power socket

and let the device cool completely.

• Clean the exterior surfaces and the power cord

with a slighly damp cloth. Always dry the device

well before using it again.

• Never use any cleansers, abbrasive substances

or solvents. These can damage the device.

In the event of calcium deposits

• Purchase a decalcifying agent suitable for use

with food containers from a household goods

stores (e.g. coffee machine decalcifier).

• You can use a suitable product from a

specialised dealer for the stainless steel

container bottom.

Removing / replacing the spout screen

• Open the lid q completely.

• Press down on the edge of the spout screen o

from above in order to remove it toward the insi-

de.

• Clean the spout screen owith a lightly

moistened wash cloth.

• After cleaning, insert the spout screen ofrom

above and press it firmly into place.

IB_56541_SWKT3000A1_LB5 24.08.2010 14:47 Uhr Seite 22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SWKT 3000 A1 IAN 56541 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SWKT 3000 A1 IAN 56541

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info