457973
17
Zoom out
Zoom in
Vorherige Seite
1/169
Nächste Seite
Universal Remote Control URC 1001
English - 15
Learning Function
For this you must have the original remote control
unit of the device you want to program, and this
remote control unit must be working properly.
The learning function lets you have the original
remote control unit teach the different button
functions to your new universal remote control.
This lets you add or edit any specific buttons that
do not work properly when using a preset device
code or control a device whose device code is not
available.
Learning a Key Code Signal
Place the original remote control unit of the device
with its transmitter side (front) facing towards the
universal remote control (see figure). The
optimum distance is between 0.5 and 2 inches
(0.5cm to 5cm).
In very rare cases, the specified distance is too
large. If the programming cannot be completed
successfully, reduce the distance between the two
remote controls and try it again.
Press the source device selection button (2) of
the device you want to program.
Press and hold the SET button (21) for at least
3 seconds. The display shows [CODE SETUP].
Then release the SET button (21).
Press
(8) twice. The display shows
[LEARNING].
Press the OK button (22). The display shows
[LEARN KEY].
Press the OK button (22) again. The display
shows [SELECT KEY].
Press the button that you want to assign on the
universal remote control. The display shows
[WAITING].
Press and hold down the button on the original
remote control which you want to copy the
signal from for at least 3 seconds. After
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest URC-1001 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Silvercrest URC-1001

Silvercrest URC-1001 Bedienungsanleitung - Deutsch, Holländisch, Französisch - 205 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info