Bedienungsanleitung Silvercrest Z29852A - IAN 96498 (Seite 9 von 67) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch, Finnisch)

575363

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

9 GB/IE

Getting started

– If the units of weight are set to imperial (lb:oz)

then the units of volume will be automatically

shown as ﬂ’oz.

– The standard unit of weight is g.

Weighing

Note: The kitchen scale

always starts from 0 g /

0:0.0 lb:oz

if the On / Oﬀ / Zero button

is pressed. If you place the weighing bowl

on to the kitchen scale

before switching on, it

will also start from 0 g / 0:0.0 lb:oz

If you place the weighing bowl

on the kitchen

scale

after it has been switched on, then the

display will show the weight of the weighing bowl

Press the On / Oﬀ / Zero button

once to reset

the display to 0 g / 0:0.0 lb:oz

j Place the kitchen scale on a solid, ﬂat surface.

j Press the On / Oﬀ / Zero button

to switch

on the kitchen scale

j Wait until the LC display

stops and stabilizes

on 0 g

, 0:0.0 lb:oz

or 0 ml

or 0.0 ﬂ’oz

which will be the mode the

kitchen scale was in when

it was last switched oﬀ.

j Press the mode setting

button

to set the kitchen

scale to the normal weigh-

ing mode

j If necessary select the units

of weight in advance by

pressing the g / lb:oz unit

conversion button

the bottom of the kitchen scale before you start

weighing.

j When you have selected the units of weight press

and hold down the On / Oﬀ / Zero button

for 3 seconds to switch oﬀ the kitchen scale

j Stand the kitchen scale

on a hard, ﬂat table

surface. Place the weighing bowl

on the

weighing platform

j Press the On / Oﬀ / Zero button

to switch on

the kitchen scale in the normal weighing mode.

j Wait until all the segments of the LC display

have illuminated and the kitchen scale has

stabilized at 0 g

, 0:0.0 lb:oz

j Place the substance to be weighed into the

weighing bowl

to start the weighing process.

The LC display

shows the weight of the sub-

stance in the weighing bowl in the selected unit

of weight.

Note: The kitchen scale works without the weighing

bowl

in the same way. Simply follow and repeat

the above steps without the weighing bowl

Weigh and add

The kitchen scale

allows you to carry out con-

secutive weighings without emptying the weighing

bowl

between weighings.

j Place the weighing bowl

on the weighing

platform

j Press the On / Oﬀ / Zero button

to switch

on the kitchen scale

j Wait until the LC display

stops and stabiliz-

es on 0 g

, 0:0.0 lb:oz

or 0 ml

0.0 ﬂ’oz

, which will be the mode the kitchen

scale was in when it was last switched oﬀ.

j Press the mode button

to set the scale to

weighing mode

(preset to g or lb:oz).

j Place the substance to be weighed into the

weighing bowl

to start the weighing process.

The LC display

shows the weight of the ﬁrst

substance placed in the weighing bowl.

j Press the On / Oﬀ / Zero button

to reset the

LC display

to zero.

j You can add further substances into the weighing

bowl in the same way and pressing the

On / Oﬀ / Zero button

between each new

substance.

96498_silv_Digitale_Kuechenwaage_Content_GB_IE_FI_SE_DK.indd 9 19.11.13 08:21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest Z29852A - IAN 96498 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest Z29852A - IAN 96498

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info