Bedienungsanleitung Silvercrest Z30342 IAN 53906 (Seite 18 von 24) (Englisch, Portugiesisch, Spanisch)

737672

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

18 GB/MT

Use / Cleaning and Maintenance / Disposal

wise direction until it is tight (note the markings

on the device).

Using of the salt

and pepper mill

j Remove the cover

j Please keep the button

pushed to activate

the salt and pepper mill. The bulb

on the

base of the salt and pepper mill will then be

simultaneously activated.

Note: Use the mill only when the container

is full and do not leave the mill switched on

uninterrupted for longer than 1 minute so that it

does not overheat. After using the mill for one

minute, let it cool down for at least 3 minutes

before switching it on again.

Adjusting the grinding level

j Turn the adjustable screw

clockwise to re-

ceive a ﬁner grinding level.

j Turn the adjustable screw

anticlockwise to

receive a coarser grinding level (see ﬁg. C).

Note: If you can no longer turn the grinder

when it is adjusted to very ﬁne, you have to se-

lect a coarser setting. If the grinder still does

not turn, it may be clogged up. Release the ad-

justment screw

and take out the grinder.

Clean it, place it back in position and then

retighten the adjustment screw

Recharging the salt / pepper

mill again

j Remove the cover

j Place the charging station

onto a stable and

level surface. Insert the adaptor

into the charg-

ing station

and then connect it to a socket.

j Place the salt / peppermill with the Silvercrest

logo facing towards the front on the charging

station

in order to start the charging pro-

cess. The charging time is approximately 3

hours.

Note: The red LED light on the mill will shine

during the charging process. It will go out when

the rechargeable batteries have been completely

recharged.

Replacing the light

Note: Remove the rechargeable batteries before

replacing the light bulb in order to avoid switching

the salt / pepper mill on by accident. Only use light

bulbs of the same type and the same wattage as

you could otherwise damage the mill.

j Turn the salt / pepper mill around so that the

grinder and the lighting

are at the top.

j Carefully remove the light bulb from the bulb

socket.

j Insert the new light bulb into the bulb socket.

Cleaning and Maintenance

j The device should only be cleaned on the out-

side with a soft dry cloth.

j Under no circumstances should you use liquids

or detergents, as these will damage the device.

Disposal

The packaging is made entirely of recy-

clable materials, which you may dispose

of at local recycling facilities.

Contact your local refuse disposal authority for more

details of how to dispose of your worn-out product.

To help protect the environment, please

dispose of the product properly when it

has reached the end of its useful life and

not in the household waste. Information

on collection points and their opening

hours can be obtained from your local

authority.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest Z30342 IAN 53906 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest Z30342 IAN 53906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info