SL 30/35 Hull Sonar Surface Processor Setup Instructions 901-10111802 / Issue 1.4
Page 2
Kongsberg Mesotech Ltd.
Port Coquitlam, BC - Canada
SL 30/35 HULL SONAR SURFACE PROCESSOR
SETUP INSTRUCTIONS
1 SET UP WINDOWS XP/2000 OPERATING SYSTEM
1.1. Make a note of the computer serial number printed on the label on the top of the computer.
1.2. Turn on the computer.
• Windows XP
1.3. The “Welcome to Microsoft Windows XP” screen will appear, press “Next”.
1.4. Use default selections on the next “Select System Settings” screen, push “Next”.
1.5. Leave the default selection “(GMT) Greenwich Mean Time” on the “Time zone selection” screen,
push “Next”.
1.6. The “End User License Agreement” will appear, select “Yes” and press “Next”.
1.7. When the installation procedure asks you to enter a name for the computer, type in “SL3035-“
followed the serial number without the first three letters “US0”. For example, if the serial number is
US01274363, then enter the name “SL3035-1274363”, push “Next”.
1.8. On the next screen “How will this computer connect to the Internet?” select “Local Area Network
(LAN)”, then press “Next”.
1.9. “Setting up a high speed connection” will appear, select “Obtain IP address automatically” and
“Obtain DNS automatically”, press “Next”.
1.10. On the next screen “Ready to register with Microsoft?” select “No”, push “Next”.
1.11. On “Thank you” screen push “Finish”, the computer will restart.
1.12. After reboot Windows starts “Found new hardware wizard” to install a driver for an additional
serial ports board. Insert a floppy disk labelled “PCI Drivers Disk for Windows” into the floppy
disk drive.
1.13. Select “Install from a list or specific location”, click “Next”.
1.14. Click “Include this location in the search”, enable “Search Removable Media”.
1.15. Click “Browse”, then “My Computer”, select “3
1
/
2
Floppy (A)”, press “Next”.
1.16. Click “Continue Anyway”, press “Finish”.
1.17. “Found new hardware wizard” pops up again to install a video card driver, insert a CD-ROM with
Nvidia drivers; select “Install from a list or specific location” and push “Next”.
1.18. On the screen “Please choose your search and installation options” go with the default
selections: “Search for the best driver in these locations” and “Search removable media”, press
“Next”.
1.19. Windows will find and install drivers for the video card; when it completes the installation, the
wizard should say: “The wizard has finished installing software”, press “Finish”.
1.20. Follow “Found new hardware wizard” for port “A” by selecting “Install from a list or specific
location”, click “Next” and press “Next” again on the next dialog.
1.21. Click “Continue Anyway” and push “Finish” to close the wizard.
1.22. Repeat 1.20 and 1.21 for port “B”.
Windows XP Service Pack Installation
1.23. Insert the SL 30/35 installation CD-ROM in the CD drive, right-click the “Start” button and
