Bedienungsanleitung Singer 1004 Vivo (Seite 12 von 14) (Englisch)

616809

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ZIG-ZAG STITCHING

The Zig-Zag stitch can be used for seam finishing, appliqué work or decorative sewing.

Seam Finishing

Seam edges support the garment and should be given a durable finishing, particularly if

the fabric is likely to ravel.

There are two different ways to finish seams: Trimming after stitching the seam edge or

overedging. Try the techniques on a scrap fabric first to determine which is right for your

project.

2.Decorative Stitching

Add a personal touch to your projects by embellishing with decorative threads. Mix

different types and colors of thread to create border-like finishes on garments, home

décor, crafts and more.

Set the machine for Stitch #7, #8 or #9, depending on the look you want.

Attach the Satin Foot.

If a heavier weight thread (such as top stitching thread) will be used, be sure to change

the needle to a larger size as well.

ZIG-ZAG STITCHING

BLIND HEM STITCHING

The Blind Hem stitch is primarily used for creating nearly invisible hems on various types of

projects such as curtains, trousers, skirts, etc. There are two different blind hem stitch

selections on the machine: the standard blind hem stitch (for hems on woven fabrics) and

the stretch blind hem stitch (for hems on stretch knit fabrics).

Set the machine to Stitch #10 for the standard blind hem stitch, or set the machine to Stitch

#11 for the stretch blind hem stitch. Insert the appropriate needle for the fabric to be

hemmed (see the Needle, Fabric & Thread Chart for recommendations).

Thread the top of the machine and bobbin with a thread color that matches or blends as

closely as possible to the color of the item to be hemmed.

1.Fold and pin the fabric, as shown.

2.Place the fabric under the blind hem presser foot with the fold of the fabric positioned

so that the needle just pierces the fold when the needle swings to the left. Be sure to

remove pins as you sew.

Appliqué

Appliqué is done by stitching shaped pieces of fabric onto a foundation fabric to form a

design or pattern. This technique offers unlimited creative possibilities.

1.Prepare the Appliqué

Apply paper-backed fusible web to the wrong side of the Appliqué fabric, following the

manufacturer's recommendations. Draw the Appliqué shape, then cut out the shape from

the fabric that has been fused to the fusible web. Remove the paper backing. Position the

applique on the foundation fabric, then fuse in place.

2.Stitch the Appliqué

Set the machine for stitch #6,the Zig-Zag Satin Stitch

To stitch the appliqué sew so that the right swing of the stitch falls off the outer edge of the

appliqué, enclosing the raw edge of the fabric. The left swing of the stitch goes into the

appliqué fabric.

3.When finished, fold the hem down and press.

1.Overedged Seam Finish

Set the machine for Stitch #7 or #8 and attach the Satin Foot. Sew, with the right side of the

stitch at the edge of the seam. Trim the seam edges evenly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Singer 1004 Vivo Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info