467663
82
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
82
G.SETTING OF EACH PATTERN
You can change the stitch width, length, mirror/
reverse stitch and elongation of each pattern.
1. Set the machine to setting mode.
2. Press the setting button (2-nd. left function
button)
3. LCD will indicate the setting of its pattern.
As you shift the cursor, the setting of each
pattern will be indicated.
Note:
As letter stitches cannot change setting, setting
button will not appear.
a.Setting the stitch width and length
Machine wil pre-set the stitch width and length
suitable for the pattern. They are indictated in
highlight. You can change them as follows.
First, check that the lower arrow mark is
highlighted.
If it is not so, press the mode button.
For narrower width, press function button (a-1).
For wider width, press function button (a-2).
For shorter length, press function button (a-3).
For longer length, press function button (a-4).
b. Mirror / Reverse stitch
Press the mode button and highlight the upper
arrow mark on the right side of LCD.
The marks of Mirror/Reverse stitch are below.
b-1. Regular stitch
b-2. Mirror stitch
b-3. Reverse stitch
b-4. Mirror and Reverse stitch
Pressing the function button directly below
these mark, mark will change alternately or in
rotation.
If mark is not indicated, its pattern cannot
change mirror/reverse stitch.
c. Elongation
Check that the upper arrow mark is highlighted.
If it is not so, press the mode button.
By pressing the elongation button (most right
function button), stitch will elongate as below.
c-1. Regular length
c-2. Double length
c-3. Triple length
c-4. 4X length
c-5. 5X length
If mark is not indicated, the pattern cannot
elongate.
4. After you have completed the settings, press
the mode button (a) and highlight the lower
arrow mark and press the close button (most
left function button)(b).
Machine will return to selecting mode.
9940EFSt.pm6 2003.9.10, 8:33 PM82
82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Singer Quantum 9940 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info