Please use following foot control:
“This appliance has a polarized plug (one blade winder than the other). To reduce the risk
of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not modify the plug in any way.”
When not in use, be sure to turn power switch OFF
and unplug machine.
Do not expose machine to direct sunlight or
humid atmosphere.
Do not use thinner or other similar solvents
to clean machine.
Be sure to turn power switch OFF before replacing
sewing machine needle, or lubricating machine.
2
Sewing machine model number Used with foot controller number
XL-6000 YC-425 (UL, CSA)
Thinner
* While operating sewing machine close face plate cover.
* Do not use embroidery unit carriage as handle.
* Do not carry sewing machine while embroidery unit is attached.
This sewing machine uses a micro computer and precision electronic circuits consisting of semiconductor
components, so please observe the following precautions:
* Keep room temperature at 40 F to 100 F. If temperature of room where machine is too low, machine may
present problems such as failure to reach its normal sewing speed.
