66
78
Install Bobbin Winder Guide.
Pass thread along groove.
Remove Bobbin Winder Guide and close
cover of Endless Bobbin Compartment.
* To pause and re-start bobbin
winding while machine is engaged in
bobbin winding, press start/stop
button.
Press pictogram located
on upper part of LCD screen.
Upon completion of winding of
bobbin, bobbin thread is automatically
cut. Now, you can start embroidery
with no additional preparation.
10
11
12
* Intially place Guide from its far side.
*Press front of guide until it clicks in
place.
Pull thread in direction of
arrow to cut thread.
9
Cutter
[1]
[2]
[3]
[4]
[5]
Draw thread toward you, and thread
will be trimmed.
Correct threading
* When Bobbin Fill thread has run out during automatic winding of bobbin, a
helpful message will appear on LCD screen and machine will stop winding
bobbin. Make sure bobbin is correctly threaded in bobbin case (refer to page
120). Install new spool of bobbin fill thread and follow steps 2 ~ 10.
Re-start machine, and it will start sewing remaining part of embroidery.
When bobbin thread has run out, machine will automatically wind bobbin.
Follow the Threading Track arround all the turns and
thread points [1] though [5]. At numbered positions 1
~ 3 lightly pull thread to assure it slips into position. At
Position 4 pull thread slightly harder to assure thread
passes under final spring. See Step 9 for Step 5
Instructions.
