Bedienungsanleitung Sinojo ES1300 (Seite 2 von 135) (Englisch)

463772

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

Introduction

Thank you for purchasing this embroidery and sewing machine. Before using this machine, carefully read

the "Important Safety Instructions", and then study this manual for the correct operation of the various

functions. In addition, after you have finished reading this manual, store it where it can quickly be

accessed for future reference.

Important Safety Instructions

Please read these safety instructions before attempting to use the machine.

This machine is intended for household use.

DANGER - To reduce the risk of electric shock

Always unplug the machine from the electrical outlet immediately after using, when cleaning, when

making any user servicing adjustments mentioned in this manual, or if you are leaving the machine

unattended.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons.

2 Always unplug the machine from the electrical outlet when removing covers, lubricating, or when

making any adjustments mentioned in the instruction manual.

• To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp the plug

and pull it out of the electrical outlet. Do not pull the cord.

• Plug the machine directly into the electrical outlet. Do not use an extension cord.

• Always unplug your machine if the power is cut.

3 Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been

dropped or damaged, or water is spilled on the unit. Return the machine to the nearest authorized dealer

or service center for examination, repair, electrical or mechanical adjustment.

• While the machine is stored or in use if you notice anything unusual, such as an odor, heat,

discoloration or deformation, stop using the machine immediately and unplug the power cord.

• When transporting the sewing machine, be sure to carry it by its handle. Lifting the sewing machine by

any other part may damage the machine or result in the machine falling, which could cause injuries.

• When lifting the sewing machine, be careful not to make any sudden or careless movements, otherwise

you may injure your back or knees.

4 Always keep your work area clear:

• Never drop or insert any object into any opening.

• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

• Do not use the machine near a heat source, such as a stove or iron; otherwise, the machine, power

cord or garment being sewn may ignite, resulting in fire or an electric shock.

• Do not place this sewing machine on an unstable surface, such as an unsteady or slanted table,

otherwise the sewing machine may fall, resulting in injuries.

5 Special care is required when sewing:

• Always pay close attention to the needle. Do not use bent or damaged needles.

• Keep fingers away from all moving parts. Special care is required around the machine needle.

• Switch the sewing machine to the symbol “O” position to turn it off when making any adjustments in the

needle area.

• Do not use a damaged or incorrect needle plate, as it could cause the needle to break.

• Do not push or pull the fabric when sewing, and follow careful instruction when freehand stitching so

2/135 SINOJO OPTOELECTRONIC TECHNOLOGY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sinojo ES1300 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info