Homeplug network security can be added by the steps below: (NOTE: it is more
convenient to bring devices, which are to be configured into the same logical network
security, side by side during this procedure. After the network security is set, the devices
can be deployed anywhere at home)
Create a private encrypted network
Step 1: Create a secure network.
First clear the public network and create a private network on HomePlug A by pressing
the SECURITY button more than 10 seconds until all LED lights simultaneously turn off
and on once. Do the same on HomePlug B. At this moment, the network names have
changed to a random name and are ready to be joined together.
Step 2: Join the secure network.
Press the SECURITY button of both HomePlugs for 2 to 3 sec (make sure the POWER LED
starts blinking). It doesn’t matter which device’s button is pushed earlier than the other,
but please push the second device’s Security button within two minutes after pushing the
first device’s Security button. This way, HomePlug B joins the same encrypted network as
HomePlug A.
Please note: If you want to connect with any of the below Sitecom Homeplugs, press the
NMK button on these for 5~8 seconds to join a secure network.
- LN-506/LN-516
- LN-507/LN-517
- LN-508/LN-518
- LN-509/LN-519
Add an extra Homeplug
First, clear the original network security of the extra HomePlug by pressing its SECURITY
button more than 10 seconds until all LED lights simultaneously turn off and on once. At
this moment, its network security name has been changed to a random name and is
ready to be assigned another network name.
Next, press the SECURITY button of the extra HomePlug and the SECURITY button on a
HomePlug that is already connected to the network for 2 to 3 sec (make sure the POWER
LED starts blinking). It doesn’t matter which device’s button is pushed earlier than the
other, but please push the second device’s Security button within two minutes after
pushing the first device’s Security button. This way, the extra HomePlug joins the same
encrypted network as the rest.
Remove a device from a network Security
If for example, device A and device B are in the same logical network security and you
want to remove device A from this logical network security, just press the SECURITY
button of device A for 10 seconds. This makes device A unable to communicate with
device B.
Make two public network devices private
