78
Therefore the IP address of the Internet Camera must be
set from a workstation on the same subnet.
A3: Other possible problems might be due to the
network cable. Try replacing your network cable. Test
the network interface of the product by connecting a local
computer to the unit, utilizing a standard Crossover (hub
to hub) Cable. If the problem is not solved the Internet
Camera might be faulty.
Q: Why does the Power LED not light up constantly?
A: The power supply used might be at fault. Confirm
that you are using the provided power supply DC 5V for
the Internet Camera and verify that the power supply is
well connected.
Q: Why does the Link LED not light up properly?
A1: There might be a problem with the network cable.
To confirm that the cables are working, PING the address
of a know device on the network. If the cabling is OK
and your network is reachable, you should receive a
reply similar to the following (…bytes = 32 time = 2 ms).
A2: The network device utilized by the Internet Camera
is not functioning properly such as hubs or switches.
Confirm the power for the devices are well connected and
functioning.
Q: Why does the Internet Camera work locally but not
externally?
A1: Might be caused from the firewall protection. Need
to check the Internet firewall with your system
administrator.
