527680
35
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
Enable Port Forwarding: Enable Port Forwarding
Local IP: This is the private IP of the server behind the NAT firewall.
Type: This is the protocol type to be forwarded. You can choose to forward “TCP”
or “UDP” packets only, or select “both” to forward both “TCP” and “UDP” packets.
Port Range: The range of ports to be forward to the private IP.
Comment: description of this setting.
Add: Fill in the "Private IP", “Type”, “Port Range” and "Comment" of the setting to
be added and then click "Add". Then this Port Forwarding setting will be added
into the "Current Port Forwarding Table" below.
Remove: If you want to remove a Port Forwarding setting from the "Current Port
Forwarding Table", select the Port Forwarding setting that you want to remove in
the table and then click "Delete Selected". If you want to remove all Port
Forwarding settings from the table, just click "Delete All" button. Click "Reset" will
clear your current selections.
Click Apply at the bottom of the screen to save the above configuration.
Virtual Server
Use the Virtual Server function when you want different servers/clients in your LAN to
handle different service/Internet application type (e.g. Email, FTP, Web server etc.) from
the Internet. Computers use numbers called port numbers to recognize a particular
service/Internet application type. The Virtual Server allows you to re-direct a particular
service port number (from the Internet/WAN Port) to a particular LAN private IP address
and its service port number.
Enable Virtual Server: Enable Virtual Server.
Local IP: This is the LAN client/host IP address that the Public Port number
packet will be sent to.
Local Port: This is the port number (of the above Private IP host) that the below
Public Port number will be changed to when the packet enters your LAN (to the
LAN Server/Client IP).
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sitecom WLR-4004 - N300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sitecom WLR-4004 - N300

Sitecom WLR-4004 - N300 Installationsanweisung - Holländisch - 2 seiten

Sitecom WLR-4004 - N300 Bedienungsanleitung - Holländisch - 14 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info