Bedienungsanleitung Skil 0330 (Seite 9 von 84) (Alle Sprachen)

758635

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

-the battery is nearly empty (to protect against

deep discharge) --> a low battery level or ashing low

battery level qb is shown by the battery level indicator

when pressing button L; charge battery

! 



damaged

• Holding and guiding the tool

! while working, always hold the tool at the grey-

coloured grip area(s)

-for optimal results keep a 5 - 10 cm distance to the

ground

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always switch o the tool, remove battery pack, and

ensure that all moving parts have come to a complete

standstill

• Always keep tool clean (especially ventilation slots B 2)

-clean the tool after each use with a soft brush or a

cloth (do not use cleaning agents or solvents)

• Storage r

-securely mount storage rail G on the wall with 2 screws

(not supplied) and horizontally leveled

-store the tool indoors in a dry and locked-up place, out

of reach of children

-do not cover the tool with plastic (plastic may cause

moisture with rust/corrosion as a result)

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

TROUBLESHOOTING

• The following listing shows problem symptoms, possible

causes and corrective actions (if these do not identify

and correct the problem, contact your dealer or service

station)

! in case of electrical or mechanical malfunction,



Motor does not start or stops suddenly

-empty battery -> charge battery

-hot battery -> let battery cool down

-on/o switch defective -> contact dealer/service station

-defective motor -> contact dealer/service station

Tool operates intermittently

-on/o switch defective -> contact dealer/service station

-internal wiring defective -> contact dealer/service

station

-impeller blocked by foreign object -> remove blockage

ENVIRONMENT

• Do not dispose of electric tools, batteries,

accessories and packaging together with household

waste material (only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

• Only use the following batteries and chargers with

this tool

-SKIL battery: BR1*31****

-SKIL charger: CR1*31****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

-when charging 4...40°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3 Read the instruction manual before use

4 Batteries may explode when disposed of in re, so do not

burn battery for any reason

5 Store tool/charger/battery in locations where temperature

will not exceed 50°C

6 

debris (keep bystanders a safe distance away from work

area)

7 Wear protective glasses and hearing protection

8 Do not expose tool to rain

9 Do not dispose of electric tools and batteries together

with household waste material

USE

• Assembly instructions w

-tube D automatically ts on housing by snapping button

-ensure that the tube is assembled correctly

-nozzle E automatically ts on tube by snapping lock

lever e

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery 2

• On/o

-switch on tool by turning wheel A

-with wheel A the air ow control can be adjusted from 0

to high (0 – max)

! before switching on the tool, ensure that it is not

in contact with any object

! 

run for a few seconds

• Battery level indicator q

-press the battery level indicator button L to show the

current battery level qa

! when the lowest level of the battery indicator

qb, the

battery is empty

! 

after pressing button L qc, the battery is not

within the allowable operating temperature range

• Battery protection

The tool is suddenly being switched o or prevented from

being switched on, when

-the load is too high --> remove load and restart

-the battery temperature is not within the allowable

operating temperature range of -20 to +50°C --> 2

levels of the battery level indicator start ashing when

pressing button L qc; wait until battery has returned

within the allowable operating temperature range

Skil 0330 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info