Bedienungsanleitung Skil 0429 (Seite 11 von 140) (Alle Sprachen)

758632

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 9 will remind you of this when the need for

disposing occurs

! prior to disposal protect battery terminals with



NOISE / VIBRATION

• Measured in accordance with EN 62841 the sound

pressure level of this tool is 77.8 dB(A) (uncertainty K = 3

dB) and the sound power level 89.3 dB(A) (uncertainty

K = 2.1 dB), and the vibration < 2.5 m/s² (triax vector

sum; uncertainty K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 62841;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

 0428/0429/0430

INTRODUCTION

• Cet outil a été conçu pour tailler les haies et les buissons

et est uniquement destiné à un usage domestique

• Cet outil n’est pas conçu pour un usage professionnel

• Lisez attentivement ce manuel d’instruction avant



référer ultérieurement 3

• Prêtez attention aux consignes de sécurité et aux

avertissements; ne pas suivre ces instructions peut

entraîner des graves blessures

• Vériez que le conditionnement contient toutes les

pièces présentées dans le schéma 2

• Lorsque des pièces manquent ou sont endommagées,

veuillez contacter votre distributeur

CARACTERISTIQUES TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Interrupteur de la poignée arrière

B Interrupteur de la poignée avant

C Bouton de verrouillage

D Lames de coupe

E Protège-main

F Protection du bout de lame

G Fentes de ventilation

H Crochet de rangement

J Rail de rangement

K Cache-lame

L Indicateur de niveau de charge de la batterie

! wear gloves when handling or cleaning the cutting

blades

• Regularly check the condition of the cutting blades and

the tightness of the blade bolts

• Regularly check for worn or damaged components and

have them repaired/replaced when necessary

• Sharpening the cutting blades

! remove battery from tool

-sharpen the cutting blades with a small and smooth le,

in case a solid object damaged them

-we advise you, however, to have the blades sharpened

by a specialist

-lubricate the cutting blades after sharpening

• Storage t

-securely mount storage rail J on the wall with 2 screws

(not supplied) and horizontally leveled

-use blade cover K when storing the tool

-before storing the tool, wipe o the cutting blades with

an oil-soaked rag to prevent corrosion

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

• Be aware that damage due to overload or improper

handling of the product will be excluded from the

warranty (for the SKIL warranty conditions see

www.skil.com or ask your dealer)

TROUBLESHOOTING

• The following listing shows problem symptoms, possible

causes and corrective actions (if these do not identify

and correct the problem, contact your dealer or service

station)

! in case of electrical or mechanical malfunction,



Motor does not start or stops suddenly

-empty battery -> charge battery

-hot battery -> let battery cool down

-cutting blades jammed -> clear jammed material

-internal fault -> contact dealer/service station

Tool operates intermittently

-on/o switch defective -> contact dealer/service station

-internal wiring defective -> contact dealer/service

station

-impeller blocked by foreign object -> remove blockage

Motor runs but blades remain stationary

-internal fault -> contact dealer/service station

Cutting blades hot

-cutting blades blunt -> have blades sharpened

-cutting blades have dents -> have blades inspected

-too much friction due to lack of lubricant -> lubricate

blades

ENVIRONMENT

• Do not dispose of electric tools, batteries,

accessories and packaging together with household

waste material (only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

Skil 0429 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info