Bedienungsanleitung Skil 0430 (Seite 10 von 140) (Alle Sprachen)

758633

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

-the battery is nearly empty (to protect against

deep discharge) --> a low battery level or ashing low

battery level qb is shown by the battery level indicator

when pressing button L; charge battery

! 



damaged

• Two-hand safety switch w

Prevents the tool from being switched on accidentally

-rst unlock by pressing knob C

-switch on the tool by pressing both switch A and switch

-switch o the tool by releasing either switch A or switch

• Operating the tool

! start trimming only when motor is running

! do not cut groundcovering plants in order to

prevent earth/sand from damaging cutting blades

! do not overload the tool by cutting stems larger

than 20 mm in thickness

-move tool away from cutting area before switching o

! 

move for a few seconds

• Blade tip protector F 2

-prevents kickback of the tool when solid objects (such

as fence posts or house walls) are touched

-protects the end blades from damage

• Trimming hedges e

-trim the sides of the hedge rst (from the bottom

upwards), then cut the top

-trim the side of a hedge in such a way that it will be

slightly narrower at the top

-use a hand saw or pruning shears to cut thicker

branches

• Holding and guiding the tool r

-hold the tool rmly with both hands and take a secure

stance

! 

coloured grip area(s)

-guide the tool ahead of you

APPLICATION ADVICE

• For trimming a hedge at a uniform height level

-fasten a piece of string along the length of the hedge at

the desired height

-trim the hedge just above this string

• Recommended cutting/trimming times (Western Europe)

-trim hedges with deciduous leaves in June and October

-trim evergreen hedges in April and August

-trim conifers and other fast-growing shrubs every 6

weeks from May until October

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Keep tool and cutting blades clean

! remove battery from tool before cleaning

-clean the tool with a damp cloth (do not use cleaning

agents or solvents)

-clean ventilation slots G 2 regularly with a brush or

compressed air

-after use, always carefully clean and lightly lubricate the

cutting blades

• Always wear long trousers and long sleeves when

operating the tool

• Keep other persons and animals at a distance of 5

metres when using the tool

• Take a secure stance when working (do not overreach,

especially when using steps or a ladder)

• In case of electrical or mechanical malfunction,

immediately switch o the tool and remove battery

AFTER USE

• Store the tool indoors in a dry and locked-up place, out

of reach of children

-store the battery pack separately from the tool

BATTERIES

• The battery supplied is partially charged (to ensure

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for the

rst time)

• Only use the following batteries and chargers with

this tool

-SKIL battery: BR1*31****

-SKIL charger: CR1*31****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

-when charging 4...40°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3 Read the instruction manual before use

4 Batteries may explode when disposed of in re, so do not

burn battery for any reason

5 Store tool/charger/battery in locations where temperature

will not exceed 50°C

6 DANGER - Keep hands away from the blade

7 Wear protective glasses and hearing protection

8 Do not expose tool to rain

9 Do not dispose of electric tools and batteries together

with household waste material

USE

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery 2

• Battery level indicator q

-press the battery level indicator button L to show the

current battery level qa

! when the lowest level of the battery indicator

qb, the

battery is empty

! 

after pressing button L qc, the battery is not

within the allowable operating temperature range

• Battery protection

The tool is suddenly being switched o or prevented from

being switched on, when

-the load is too high --> remove load and restart

-the battery temperature is not within the allowable

 --> 2

levels of the battery level indicator start ashing when

pressing button L qc; wait until battery has returned

within the allowable operating temperature range

Skil 0430 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info