Bedienungsanleitung Skil 0480 (Seite 12 von 140) (Alle Sprachen)

797782

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

4 levels of the battery level indicator keep solid red for

10s; wait until battery has returned within the allowable

operating temperature range qd

! do not continue to press the on/o switch after the

tool is switched o automatically; battery may be

damaged

• on/o switch w

! Make sure you have a secure and balanced

footing.

-Depress and hold the front switch lever K

-Pressing the knob B

-switch on the tool by pressing the trigger switch F

-switch o the tool by releasing the trigger switch F

• Operating the tool

! start trimming only when motor is running

! do not cut ground covering plants in order to

prevent earth/sand from damaging cutting blades

! do not overload the tool by cutting stems larger

than 20 mm in thickness

-move tool away from cutting area before switching o

! after switching o the tool ,wait for the blades to

come to a complete stop

• Trimming hedges e

-trim the sides of the hedge rst (from the bottom

upwards), then cut the top

-trim the side of a hedge in such a way that it will be

slightly narrower at the top

-use a hand saw or pruning shears to cut thicker

branches

• Holding and guiding the tool r

-hold the tool rmly with both hands and take a secure

stance

! while working, always hold the tool at the grip

area(s)

-guide the tool ahead of you

APPLICATION ADVICE

• For trimming a hedge at a uniform height level

-fasten a piece of string along the length of the hedge at

the desired height

-trim the hedge just above this string

• Recommended cutting/trimming times (Western Europe)

-trim hedges with deciduous leaves in June and October

-trim evergreen hedges in April and August

-trim conifers and other fast-growing shrubs every 6

weeks from May until October

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Keep tool and cutting blades clean

! remove battery from tool before cleaning

-clean the tool with a damp cloth (do not use cleaning

agents or solvents)

-clean ventilation slots G 2 regularly with a brush or

compressed air

-after use, always carefully clean and lightly lubricate the

cutting blades

! wear gloves when handling or cleaning the cutting

blades

• Regularly check the condition of the cutting blades and

the tightness of the blade bolts

• Always wear long trousers and long sleeves when

operating the tool

• Keep other persons and animals at a distance of 5

metres when using the tool

• Take a secure stance when working (do not overreach,

especially when using steps or a ladder)

• In case of electrical or mechanical malfunction,

immediately switch o the tool and remove battery

AFTER USE

• Store the tool indoors in a dry and locked-up place, out

of reach of children

-store the battery pack separately from the tool

BATTERIES

• The battery supplied is partially charged (to ensure

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for the

rst time)

• Only use the following batteries and chargers with

this tool

-SKIL battery: BR1*41****

-SKIL charger: CR1*41****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

-when charging 4...40°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3 Read the instruction manual before use

4 Batteries may explode when disposed of in re, so do not

burn battery for any reason

5 Store tool/charger/battery in locations where temperature

will not exceed 50°C

6 Pay attention to the risk of injury caused by ying

debris (keep bystanders a safe distance away from work

area)

7 Wear protective glasses and hearing protection

8 Do not expose tool to rain

9 Do not dispose of electric tools and batteries together

with household waste material

USE

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery 2

• Battery level indicator q

-press the battery level indicator button J to show the

current battery level qa

! when the lowest level of the battery indicator

starts ashing red for 10s after pressing button J

qb, the battery is nearly depleted.

• Battery protection

The tool is suddenly being switched o or prevented from

being switched on, when

-the load is too high --> remove load and restart

-the battery is empty --> the 4 levels of the battery

level indicator starts ashing red for 10s; Remove the

battery from the tool and charge the battery qc

-the battery temperature is not within the allowable

operating temperature range of -20 to +50°C -->

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 0480 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info