Bedienungsanleitung Skil 0534 (Seite 15 von 236) (Alle Sprachen)

758634

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite



same applies for persons who do not or do not

 The

operating instructions should always be ready to hand.

Persons unt or tired must not operate the chain saw.

• It is recommended that the rst time user should have

practical instruction in the use of the chain saw and the

protective equipment from an experienced operator and

that the initial practice should be cutting logs on a saw

horse or cradle

• Do not touch rotating chain

• Always use approved personal protective equipment, this

reduces the danger of injury from thrown about cutting

material and accidental touching of the saw chain:

-Safety helmet, when there is a hazard of falling

branches or similar

-Hearing protection

-Protective glasses or a face mask

-Gloves with saw protection

-Trousers with saw protection

-Safety boots with saw protection, steel toes and non-

slip soles

• Do not operate chain saw near other people,

children or animals

• Do not operate chain saw after drinking alcohol



medication

• Ensure that children do not play with the tool

AFTER USE

• Always switch o the tool and remove the battery

-whenever leaving the tool unattended

-before clearing jammed material

-before checking, cleaning or working on the tool

-after striking a foreign object

-whenever the tool starts vibrating abnormally

• Store the tool indoors in a dry and locked-up place, out

of reach of children

-store the battery pack separately from the tool

BATTERIES

• (to ensure

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for the

rst time)

• 

this tool

-SKIL battery: BR1*31****

-SKIL charger: CR1*31****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

-when charging 4...40°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3 Read the instruction manual before use

4 Batteries may explode when disposed of in re, so do not

burn battery for any reason

5 Do not expose tool to rain

6 Wear protective glasses and hearing protection

7 Store tool/charger/battery in locations where temperature

will not exceed 50°C

8 Do not dispose of electric tools and batteries together

with household waste material

saw will reduce the likelihood of accidental contact with

the moving saw chain.

j) 

 Improperly tensioned

or lubricated chain may either break or increase the

chance for kickback.

k) 

not intended. For example: do not use chain saw



 Use of the chain saw for operations

dierent than intended could result in a hazardous

situation.

l) 

understanding of the risks and how to avoid them.

Serious injury could occur to the operator or bystanders

while felling a tree.

m) 

material, storing or servicing the chain saw. Make



removed. Unexpected actuation of the chain saw while

clearing jammed material or servicing may result in

serious personal injury.

CAUSES AND OPERATOR PREVENTION OF KICKBACK

Kickback may occur when the nose or tip of the guide bar

touches an object, or when the wood closes in and pinches

the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

Pinching the saw chain along the top of the guide bar may

push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the

saw which could result in serious personal injury. Do not rely

exclusively upon the safety devices built into your saw. As a

chain saw user, you should take several steps to keep your

cutting jobs free from accident or injury.

Kickback is the result of chain saw misuse and/or incorrect

operating procedures or conditions and can be avoided by

taking proper precautions as given below:

a) 





 Kickback forces can

be controlled by the operator, if proper precautions are

taken; do not let go of the chain saw.

b) 

height. This helps prevent unintended tip contact and

enables better control of the chain saw in unexpected

situations.

c) 

Incorrect replacement

guide bars and saw chains may cause chain breakage

and/or kickback.

d) Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead to increased

kickback.

ADDITIONAL SAFETY INSTRUCTIONS

PERSONAL SAFETY

• 



Skil 0534 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info